We never sell your data to third parties
SKF / CR Seals (formerly CR Seals) 100X125X12 HMSA10 V is a HMSA10 Single Lip with Auxiliary Lip radial shaft oil seal for 100mm shaft diameter, 125mm housing bore, and 12mm seal width. The auxiliary dust exclusion lip provides enhanced protection against external contaminants. Constructed with an NBR sealing lip and spring-loaded garter spring for consistent radial sealing force. Operating temperature range: -40°F to 250°F (-40°C to 121°C).
MODEL 100X125X12 HMSA10 V
Contact supplier for technical support on: 267-436-6000
$52.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
Yes
Design
HMSA10
Housing bore diameter
125.0 mm, 4.921 in
Maximum operating temperature
200.0 °C, 392.0 °F
Maximum operating temperature (°F)
200.0 °C, 392.0
Minimum operating temperature
-20.0 °C, -4.0 °F
Minimum operating temperature (°F)
-20.0 °C, -4.0
Permissible circumferential speed
32.97 m/s
Rotational speed
6300.0 r/min
Seal width
12.0 mm, 0.472 in
Sealing lip material
FLUORO RUBBER (FKM)
Shaft diameter
100.0 mm, 3.937 in
Type of outside diameter
Rubber metal reinforced
Unit system
Metric
Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
- High pumping rate
- Higher contamination exclusion with dust lip
- With garter spring
- Accommodate misalignment
SKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreSKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read more
| Brand | Boston Gear |
| Model | HF718-30KZT-B5-H3-P16 |
| Brand | Balax |
| Model | 11705-01C |
| Brand | Fanuc |
| Model | A06B-0123-B577#7008 |
SKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreSKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF