We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF / CR Seals (formerly CR Seals) 40X80X10 HMS5 RG is a HMS5 Single Lip radial shaft oil seal for 40mm shaft diameter, 80mm housing bore, and 10mm seal width. Constructed with a NBR sealing lip and spring-loaded garter spring for consistent radial sealing force. Operating temperature range: -40°F to 250°F (-40°C to 121°C). Suitable for use in electric motors, gearboxes, pumps, and other rotating equipment.
MODEL 40X80X10 HMS5 RG
Contact supplier for technical support on: 267-436-6000
$7.98 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
HMS5
Housing bore diameter
80.0 mm, 3.15 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
6.93 m/s
Rotational speed
3300.0 r/min
Seal width
10.0 mm, 0.394 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
40.0 mm, 1.575 in
Type of outside diameter
Rubber metal reinforced
Unit system
Metric
Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMS5 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer with a garter spring to maintain the right radial load.
- High pumping rate
- With garter spring
- Accommodate misalignment
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreSKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read more
| Brand | Brook Crompton |
| Model | BC4N060V5C |
| Brand | Goulds |
| Model | V12A34F4BE2SF |
| Brand | SKF Bearing |
| Model | 23160 CAC/C3W33 |
| Brand | Consolidated Bearings |
| Model | 23056-KM C/4 |
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreSKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF