We never sell your data to third parties
Dodge 022432 D-Flex 10SC elastomeric sleeve coupling spacer hub, 2-1/8" bored to size, 3600 RPM max speed. Type J coupling component for moderate shock absorption applications requiring minimal maintenance.
MODEL 022432
Contact supplier for technical support on: +1-864-284-5700
$195.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angular misalignment
1.0000, 1.0
Axial misalignment
0.2500 in, 6.35 mm
Bore diameter actual
2.1250 in, 53.975 mm
Bore length
2.3400 in, 59.436 mm
Coupling component
Spacer hub
Coupling size
10
Coupling style
Sleeve
Coupling type
Elastomeric
Flange material
Cast iron
Horsepower per 100 rat
18.0000 hp, 13.423 kW
I.D.
2-1/8 in
Max RPM
3600 rpm
Max Speed
3600 rpm
Number of bolts
4
Parallel misalignment
0.0250 in, 0.635 mm
Rated Torque
11350.0000 lbf, 50487.315 N
Shaft attachment
Bored to size
Shaft spacing
Spacer
Tightening torque
720 in/lb, 720.0 in/lb
- Coupling Style: D-Flex Type J elastomeric sleeve coupling
- Component Type: Spacer hub for 10SC coupling
- Bore Diameter: 2-1/8 inches, bored to size
- Maximum Speed: 3600 RPM
- Weight: 6.96 lbs
- Applications: Low-cost flexible coupling for moderate shock loads, no lubrication required
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read more
| Brand | MROSupply Fasteners |
| Model | FSTPCK-797503 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-830012 |
| Brand | PEER Bearing |
| Model | 24780 |
| Brand | Dichtomatik |
| Model | 75002330 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/