We never sell your data to third parties
Zero-Max 6P60 CD composite disc coupling, double-flex design with set screw hubs. This coupling uses a composite disc pack to transmit torque while accommodating parallel and angular misalignment. Double-flex configuration provides higher offset capacity for general industrial motion control applications.
MODEL 6P60
Contact supplier for technical support on: 800-533-1731
$994.45 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
A Hub Body Diameter (Ga)
3.67 inches, 93.2 mm
Angular misalignment
3
Axial misalignment
0.260 inches, 6.6 mm
B Hub Body Diameter (Gb)
5.00 inches, 127 mm
Continuous Rated Torque
6, 350 in-lbs, 718 Nm
Distance Between Shaft Ends (C)
2.41 inches, 61.2 mm
Hub Length (B)
2.44 inches, 62.0 mm
Inertia at Max Bore (A Hubs)
79.3 lb-in, 232 kg-cm
Inertia at Max Bore (B Hubs)
109 lb-in, 319 kg-cm
Inside Diameter of Disc-Pack (H)
2.42 inches, 61 mm
Max Speed
4, 600 RPM
Maximum Bore (Ea) A Hub
2.250 inches, 60 mm
Maximum Bore (Eb) B Hub
3.000 inches, 76 mm
Outside Diameter (A)
6.00 inches, 152 mm
Overall Length
7.29 inches, 185 mm
Parallel misalignment
0.069 inches, 1.8 mm
Peak Rated Torque
12, 700 in-lbs, 1, 436 Nm
Torsional stiffness
130, 763 Nm/rad
Weight at Max Bore (A Hubs)
18.40 lbs, 8.35 kg
Weight at Max Bore (B Hubs)
21.5 lbs, 9.75 kg
The Double Flex Composite Disc Coupling is ideal for precision applications that require more misalignment capacity than our Single Flex design. The coupling’s large misalignment capacity, high torsional stiffness, and overall high performance specifications make this coupling a good choice for a wide variety of applications.
| Brand | Vernon Devices |
| Model | CCH-CCH5780 |
| Brand | POBCO |
| Model | P7P2060L120 |