We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
TB Woods SS0951 L-Jaw coupling hub for SS095 size, with a 1" finished bore and 1/4" x 1/8" keyway. Stainless steel construction with straight jaw design, rated for up to 9000 RPM. Pairs with a matching L-Jaw spider and second hub to form a complete flexible coupling.
MODEL SS0951
Contact supplier for technical support on: 888-829-6637
$125.97 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore shape
Finish with keyway
Bore size
1 in
Bore size frac (in)
1.000000
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+.0005 to +.0015
Center
0.5
Coupling size
SS095
Dimension (in) (LTB)
1.46
Dimension (in) (OD)
2.13
Dimension (in) (S)
1.46
Family ID
2,008
Family name
Jaw coupling
Hub material
Stainless steel
Jaw type
Straight
Keyseat
1/4 x 1/8
Keyway
1/4 in x 1/8 in
Length-through-bore
1
Material type
Stainless steel
Max compatible bore size
1.125
Max parallel misalignment
0.015
Max RPM
9,000
Max speed
9000
Min compatible bore size
0.4375
O.D.
2.11
Overall length
2.5
Product description
SS095 X 1
Product family
L-jaw hub
Setscrew length
0.375
Setscrew length frac (in)
0.375000
Setscrew size
5/16 18NC
Size code
95
Unit Of Measure
English
Description: TB Wood's L-Jaw couplings are designed to meet high-quality standards while remaining affordable. Available with four insert materials and three hub materials, L-Jaw couplings are 100% interchangeable with industry-standard designs.
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | SMC |
| Model | VQZ215-5LO1 |
| Brand | CoxReels |
| Model | 1680-2424-H |
| Brand | KOP-FLEX |
| Model | 1961606 |
| Brand | SMC |
| Model | MHM-32D3-M9PVSAPC-X6400 |
| Brand | Superlok |
| Model | IHN-12N |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.