We never sell your data to third parties
TB Woods 12S158 Sure-Flex Plus Type S flange with 1-5/8" finished bore for Size 12 elastomeric sleeve couplings. High-strength cast-iron construction with setscrew locking and 3/8" x 3/16" keyseat. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 9,360 in-lb continuous torque with EPDM/Neoprene and 31,500 in-lb with Hytrel.
MODEL 12S158
Contact supplier for technical support on: 888-829-6637
$240.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
1 5/8 in
Bore size (in)
1-5/8
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
1.9395
Component WR²
1.9395
Construction type
Finish bore with keyway
Coupling size
12
Dimension (in) (C)
4
Dimension (in) (D)
10
Dimension (in) (H)
5 3/4
Dimension (in) (S)
3/4
Dimension (in) (T)
1-11/16
Dimension (in.) (E)
1 9/32
Flange diameter
10
Horsepower Rating at 100 RPM
66
Keyseat (in)
3/8 x 3/16
Keyseat size
3/8 in x 3/16 in
Length through bore
4
Material type
High strength cast iron
Max angular gap misalignment
0.175 (in) with EPDM/Neoprene Sleeves and 0.042 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
3.9375
Max parallel misalignment
16
Max RPM
2800
Max speed
2800
Min compatible bore size
0.875
Outside diameter
10
Power rating at 100 RPM
11 kW with EPDM or Neoprene sleeve, 37 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.75
Setscrew length
1.25
Setscrew length (in)
1 1/4
Setscrew size, location
1/2 13 UNC, One over KS and at 90 Degrees
Setscrew torque requirement
50
Setscrew Torque Requirment (ft lbs)
50
SF flange length
1.6875
SF hub diameter
5.75
SF hub length
28
Torque
9,360 in-lb with EPDM or Neoprene sleeve, 31,500 in-lb with Hytrel sleeve
Torque rate
9,360 (in-lbs) with EPDM or Neoprene sleeve; 31,500 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 12S158 12SX1 5/8 SF Flange is a high-performance coupling designed for efficient power transmission and reliable operation in various industrial applications. Engineered specifically to enhance performance and durability, this coupling serves as a crucial component in systems requiring precise alignment and robust performance.
Key Features
| High-Quality Construction | Manufactured with premium materials, ensuring longevity and resistance to wear under demanding conditions. |
|---|---|
| Flange Design | Features a convenient flange attachment that simplifies installation and maintenance, allowing for quick assembly and disassembly. |
| Size and Compatibility | Designed for 12SX1 5/8 shaft sizes, providing compatibility with a range of rotating equipment in industrial settings. |
| Performance Reliability | Engineered to withstand shock loads and vibrations, ensuring consistent performance and reduced downtime. |
| Maintenance-Friendly | The design minimizes the need for frequent adjustments, contributing to lower maintenance costs and operational efficiency. |
Applications
| Industrial Machinery | Ideal for use in conveyors, pumps, and compressors across various sectors, including food and beverage, energy, and material handling. |
|---|---|
| Power Transmission Systems | Effectively transmits torque and reduces the risk of misalignment in mechanical drive systems. |
| General Engineering | Suitable for applications requiring high reliability and performance, especially in harsh operational environments. |
Benefits
| Enhanced Durability | The robust design and material selection ensure a longer service life, reducing the need for replacements. |
|---|---|
| Improved Efficiency | Optimized performance characteristics lead to smoother operation and energy savings in power transmission. |
| Cost-Effective Solution | Lower maintenance requirements and increased reliability translate to reduced operational costs over time. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | Rollway |
| Model | 22308 VS C4 F80 W33 |
| Brand | SIEGMA |
| Model | 6IK140RGU-EFT/6GU180RC |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.