We never sell your data to third parties
TB Woods 12S65MM Sure-Flex Plus Type S flange with 65 mm finished bore for Size 12 elastomeric sleeve couplings. High-strength cast-iron construction with 18 mm x 4.4 mm keyseat and M12 x 1.75 setscrews. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 9,360 in-lb continuous torque with EPDM/Neoprene and 31,500 in-lb with Hytrel.
MODEL 12S65MM
Contact supplier for technical support on: 888-829-6637
$254.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
65 mm
Bore size (mm)
65 mm
Bore tolerance
+.030 to +.060
Bore tolerance (in)
+0.0005 to +0.0020
Component WR2 (lbs ft2)
1.9867
Component WR²
1.9867
Construction type
Finish bore with keyway
Coupling size
12
Dimension (in) (C)
4
Dimension (in) (D)
10
Dimension (in) (H)
5 3/4
Dimension (in) (S)
3/4
Dimension (in) (T)
1-11/16
Dimension (in.) (E)
1 9/32
Flange diameter
10
Horsepower Rating at 100 RPM
66
Keyseat (mm)
18mm x 4.4mm
Keyseat size
18 mm x 4.4 mm
Length through bore
102
Material type
High strength cast iron
Max angular gap misalignment
4.44 (mm) with EPDM/Neoprene Sleeves and 1.07 (mm) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
3.9375
Max parallel misalignment
16
Max RPM
2800
Max speed
2800
Min compatible bore size
23
Outside diameter
255
Power rating at 100 RPM
11 kW with EPDM or Neoprene sleeve, 37 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
22
Setscrew length
12
Setscrew length (mm)
12 mm
Setscrew size, location
M12 x 1.75 , One over KS and at 90 Degrees
Setscrew torque requirement
68
Setscrew Torque Requirment (ft lbs)
50
SF flange length
43
SF hub diameter
146
SF hub length
40
Torque
9,360 in-lb with EPDM or Neoprene sleeve, 31,500 in-lb with Hytrel sleeve
Torque rate
9,360 (in-lbs) with EPDM or Neoprene sleeve; 31,500 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 12S65MM SF Flange is a premium coupling solution designed for optimal performance in power transmission applications. Engineered with precision, this coupling provides a robust connection that ensures efficient torque transfer while accommodating misalignment. With its durable construction and advanced design, the 12S65MM SF Flange is an essential component for various industrial applications.
Key Features
| High-Quality Construction | Made from top-grade materials, the 12S65MM SF Flange ensures longevity and resistance to wear, making it suitable for demanding environments. |
|---|---|
| Versatile Design | This coupling is compatible with a range of shaft sizes, allowing for flexibility in various setups. |
| Efficient Torque Transmission | The design maximizes torque transfer while minimizing backlash, enhancing overall system performance. |
| Misalignment Compensation | Engineered to accommodate angular and parallel misalignment, which reduces stress on connected components and prolongs service life. |
| Easy Installation | Features a user-friendly design that simplifies mounting and alignment, reducing downtime during setup. |
Applications
| Industrial Machinery | Ideal for use in conveyor systems, pumps, and fans where reliable power transmission is critical. |
|---|---|
| Material Handling | Perfect for applications in material handling equipment, ensuring smooth operation under various load conditions. |
| Energy Sector | Suitable for use in applications within the energy industry, where durability and reliability are paramount. |
Benefits
| Enhanced Reliability | The robust design minimizes the risk of failure, ensuring consistent operation in high-demand applications. |
|---|---|
| Cost-Effective Performance | By reducing maintenance needs and extending service life, the 12S65MM SF Flange offers significant cost savings in the long run. |
| Improved Efficiency | Its ability to smoothly transmit torque without excessive vibration contributes to overall system efficiency, leading to better energy utilization. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | INA Bearing |
| Model | K35X40X17A |
| Brand | INA Bearing |
| Model | LFR5204-16NPP |
| Brand | Jason Industrial |
| Model | D1190-14M-20 |
| Brand | INA Bearing |
| Model | ZARN70130TN |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.