We never sell your data to third parties
TB Woods 10S52MM Sure-Flex Plus Type S flange with 52 mm finished bore for Size 10 elastomeric sleeve couplings. High-strength cast-iron construction with 16 mm x 4.3 mm keyseat. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 422 Nm continuous torque with EPDM/Neoprene and 1,282 Nm with Hytrel.
MODEL 10S52MM
Contact supplier for technical support on: 888-829-6637
$132.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
52 mm
Bore size (mm)
52 mm
Bore tolerance
+.030 to +.060
Bore tolerance (in)
+0.0005 to +0.0020
Component WR2 (lbs ft2)
0.4853
Component WR²
0.4853
Construction type
Finish bore with keyway
Coupling size
10
Dimension (in) (C)
2 23/32
Dimension (in) (D)
7.5
Dimension (in) (H)
4- 3/8
Dimension (in) (S)
7/16
Dimension (in) (T)
1 7/32
Dimension (in.) (E)
13/16
Flange diameter
7.5
Horsepower Rating at 100 RPM
61
Keyseat (mm)
16mm x 4.3mm
Keyseat size
16 mm x 4.3 mm
Length through bore
69
Material type
High strength cast iron
Max angular gap misalignment
3.21 (mm) with EPDM/Neoprene Sleeves and 0.81 (mm) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
85
Max parallel misalignment
12
Max RPM
3600
Max speed
3600
Min compatible bore size
12
Outside diameter
191
Power rating at 100 RPM
4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
16
Setscrew length
16
Setscrew length (mm)
16 mm
Setscrew size, location
M10 x 1.50, One over KS and at 90 Degrees
Setscrew torque requirement
31
Setscrew Torque Requirment (ft lbs)
23
SF flange length
31
SF hub diameter
111
SF hub length
21
Torque
422 Nm with EPDM or Neoprene sleeve, 1,282 Nm with Hytrel sleeve
Torque rate
422 (Nm) with EPDM or Neoprene sleeve; 1,282 (Nm) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 10S52MM SF Flange is a high-performance shaft coupling designed to provide exceptional reliability and durability in power transmission applications. With its innovative engineering and robust construction, this coupling is an ideal solution for various industrial applications requiring precision and efficiency.
Key Features
| Design | The 10S52MM features a split flange design that simplifies installation and maintenance processes. |
|---|---|
| Material Construction | Manufactured from high-quality materials, ensuring resistance to wear and enhanced performance under demanding conditions. |
| Load Capacity | Designed to handle significant loads, making it suitable for heavy-duty applications. |
| Compatibility | The coupling is compatible with a wide range of shaft sizes and configurations, providing flexibility in various setups. |
| Maintenance-Free Operation | Engineered to minimize maintenance needs, this coupling supports continuous operation without frequent adjustments. |
Applications
| Industrial Machinery | Perfect for use in conveyors, pumps, and other rotating equipment within manufacturing environments. |
|---|---|
| Material Handling | Ideal in systems requiring reliable torque transmission and minimal downtime. |
| Energy Sector | Suited for applications in power generation and distribution systems where performance is critical. |
Benefits
| Enhanced Efficiency | Reduces energy losses in power transmission, contributing to overall operational efficiency. |
|---|---|
| Increased Reliability | The robust design decreases the likelihood of failure, ensuring consistent performance in demanding environments. |
| Cost-Effective Solution | Lower maintenance and replacement costs due to its durable construction and design. |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | NK North America Inc. |
| Model | K1545.10500 |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.