We never sell your data to third parties
TB Woods 10S11116 Sure-Flex Plus Type S flange with 1-11/16" finished bore for a Size 10 elastomeric sleeve coupling. High-strength cast-iron construction with 3/8" x 3/16" keyseat. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 3,735 in-lb continuous torque with EPDM/Neoprene and 11,350 in-lb with Hytrel.
MODEL 10S11116
Contact supplier for technical support on: 888-829-6637
$132.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
1 11/16 in
Bore size (in)
1-11/16
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.4853
Component WR²
0.4853
Construction type
Finish bore with keyway
Coupling size
10
Dimension (in) (C)
2 23/32
Dimension (in) (D)
7.5
Dimension (in) (H)
4- 3/8
Dimension (in) (S)
7/16
Dimension (in) (T)
1 7/32
Dimension (in.) (E)
13/16
Flange diameter
7.5
Horsepower Rating at 100 RPM
61
Keyseat (in)
3/8 x 3/16
Keyseat size
3/8 in x 3/16 in
Length through bore
2.71875
Material type
High strength cast iron
Max angular gap misalignment
0.128 (in) with EPDM/Neoprene Sleeves and 0.032 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
3.375
Max parallel misalignment
12
Max RPM
3600
Max speed
3600
Min compatible bore size
0.4375
Outside diameter
7.5
Power rating at 100 RPM
4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.4375
Setscrew length
1
Setscrew length (in)
1
Setscrew size, location
3/8 16 UNC, One over KS and at 90 Degrees
Setscrew torque requirement
23
Setscrew Torque Requirment (ft lbs)
23
SF flange length
1.21875
SF hub diameter
4.375
SF hub length
18
Torque
3,735 in-lb with EPDM or Neoprene sleeve, 11,350 in-lb with Hytrel sleeve
Torque rate
3,735 (in-lbs) with EPDM or Neoprene sleeve; 11,350 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 10S11116 10SX1 11/16 SF Flange is an advanced shaft coupling designed for efficient power transmission in industrial applications. Renowned for its robust construction and innovative design, this complete unit ensures optimal performance and reliability across various environments.
Key Features
| Durable Construction | Made from high-quality materials to withstand heavy loads and harsh operating conditions, ensuring longevity and reduced maintenance. |
|---|---|
| Precise Alignment | Engineered to provide excellent alignment capabilities, minimizing wear and tear on connected components. |
| High Torque Capacity | Capable of handling significant torque loads, making it suitable for demanding applications in industries such as food and beverage, energy, and material handling. |
| Easy Installation | Designed for straightforward installation, allowing for quick assembly and reduced downtime in operations. |
| Compatibility | Compatible with a wide range of shaft sizes and configurations, making it a versatile choice for various industrial setups. |
Applications
| Industrial Machinery | Ideal for connecting shafts in various types of industrial equipment, including pumps, conveyors, and motors. |
|---|---|
| Material Handling Systems | Effective in facilitating power transmission in material handling systems where reliability is crucial. |
| Energy Sector | Suitable for use in energy generation and transmission applications, where performance and durability are paramount. |
Benefits
| Enhanced Performance | Offers improved power transmission efficiency, contributing to overall system performance and productivity. |
|---|---|
| Reduced Downtime | With its durable design and ease of installation, the 10S11116 flange minimizes operational disruptions and maintenance needs. |
| Cost-Effective Solution | Provides long-term savings by reducing the frequency of replacements and maintenance interventions due to its robust construction. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read more
| Brand | NK North America Inc. |
| Model | K1492.08X35 |
| Brand | Electra/Grove Gear |
| Model | EL8300235.00 |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.