We never sell your data to third parties
TB Woods 10S30MM Sure-Flex Plus Type S flange with 30 mm finished bore for Size 10 elastomeric sleeve couplings. High-strength cast-iron construction with 8 mm x 3.3 mm keyseat. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 422 Nm continuous torque with EPDM/Neoprene and 1,282 Nm with Hytrel.
MODEL 10S30MM
Contact supplier for technical support on: 888-829-6637
$132.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
30 mm
Bore size (mm)
30 mm
Bore tolerance
+.020 to +.041
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.4865
Component WR²
0.4865
Construction type
Finish bore with keyway
Coupling size
10
Dimension (in) (C)
2 23/32
Dimension (in) (D)
7.5
Dimension (in) (H)
4- 3/8
Dimension (in) (S)
7/16
Dimension (in) (T)
1 7/32
Dimension (in.) (E)
13/16
Flange diameter
7.5
Horsepower Rating at 100 RPM
61
Keyseat (mm)
8mm x 3.3mm
Keyseat size
8 mm x 3.3 mm
Length through bore
69
Material type
High strength cast iron
Max angular gap misalignment
3.21 (mm) with EPDM/Neoprene Sleeves and 0.81 (mm) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
85
Max parallel misalignment
12
Max RPM
3600
Max speed
3600
Min compatible bore size
12
Outside diameter
191
Power rating at 100 RPM
4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
16
Setscrew length
16
Setscrew length (mm)
16 mm
Setscrew size, location
M10 x 1.50, One over KS and at 90 Degrees
Setscrew torque requirement
31
Setscrew Torque Requirment (ft lbs)
23
SF flange length
31
SF hub diameter
111
SF hub length
21
Torque
422 Nm with EPDM or Neoprene sleeve, 1,282 Nm with Hytrel sleeve
Torque rate
422 (Nm) with EPDM or Neoprene sleeve; 1,282 (Nm) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 10S30MM Sure-Flex Plus Flange coupling is engineered to provide exceptional performance in power transmission applications. This reliable coupling features a unique design that accommodates misalignment and absorbs shock loads, making it an essential component in various industrial settings.
Key Features
| Precision Construction | The 10S30MM coupling is manufactured with high-quality materials to ensure durability and reliability under demanding conditions. |
|---|---|
| Flexibility and Misalignment Compensation | Designed to accommodate angular, parallel, and axial misalignment, this coupling enhances operational efficiency and extends the lifespan of connected equipment. |
| Vibration Dampening | The elastomeric sleeves of the Sure-Flex Plus series reduce vibration and noise, promoting smoother operation in machinery. |
| Easy Installation | The flange design simplifies the installation process, allowing for quick assembly and disassembly without the need for special tools. |
| Performance Specifications | The coupling is rated for high torque applications, ensuring consistent performance across a wide range of industrial uses. |
Applications
| Industrial Machinery | Ideal for use in conveyor systems, mixers, and pumps where reliable power transmission is critical. |
|---|---|
| Material Handling | Commonly utilized in manufacturing and material handling equipment, contributing to efficient operations. |
| Energy Sector | Suitable for applications in energy generation, where durability and performance are paramount. |
Benefits
| Enhanced Reliability | The robust design minimizes downtime and maintenance costs, ensuring continuous operation in critical applications. |
|---|---|
| Increased Efficiency | By absorbing shock and reducing vibration, the coupling helps maintain equipment alignment, improving overall system efficiency. |
| Cost-Effective | The longevity and performance of the 10S30MM coupling translate into reduced replacement and maintenance costs over time. |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
#96679909
Brand
Dodge
Model
004929
| Brand | NK North America Inc. |
| Model | K1793.300051 |
| Brand | NK North America Inc. |
| Model | K1021.B0280X12 |
| Brand | BLACKSTAR |
| Model | BLS L225 1 3/8 |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.