We never sell your data to third parties
TB Woods 9S11116 Sure-Flex Plus Type S flange for Size 9 elastomeric sleeve couplings with 1-11/16" finished bore. High-strength cast-iron construction with setscrew locking. Accepts EPDM, Neoprene, Hytrel, and Urethane sleeves; rated 2,340 in-lb torque with EPDM/Neoprene and 7,200 in-lb with Hytrel at 3,750 max RPM.
MODEL 9S11116
Contact supplier for technical support on: 888-829-6637
$95.39 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#338612
Brand
TB Woods
Model
9S1716
#338734
Brand
TB Woods
Model
9J
#339807
Brand
TB Woods
Model
10S112
#114132
Brand
Dixon
Model
SWMF125
Bore size
1 11/16 in
Bore size (in)
1-11/16
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.2170
Component WR²
0.217
Construction type
Finish bore with keyway
Coupling size
9
Dimension (in) (C)
2 13/32
Dimension (in) (D)
6.35
Dimension (in) (H)
3 5/8
Dimension (in) (S)
3/8
Dimension (in) (T)
1 1/32
Dimension (in.) (E)
25/32
Flange diameter
6.35
Horsepower Rating at 100 RPM
57
Keyseat (in)
3/8 x 3/16
Keyseat size
3/8 in x 3/16 in
Length through bore
2.40625
Material type
High strength cast iron
Max angular gap misalignment
0.109 (in) with EPDM/Neoprene Sleeves and 0.028 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
2.875
Max parallel misalignment
11
Max RPM
3750
Max speed
3750
Min compatible bore size
0.4375
Outside diameter
6.35
Power rating at 100 RPM
2.8 kW with EPDM or Neoprene sleeve, 8.5 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.375
Setscrew length
0.75
Setscrew length (in)
3/4
Setscrew size, location
3/8 16 UNC, One over KS and at 90 Degrees
Setscrew torque requirement
23
Setscrew Torque Requirment (ft lbs)
23
SF flange length
1.03125
SF hub diameter
3.625
SF hub length
25/32
Torque
2,340 in-lb with EPDM or Neoprene sleeve, 7,200 in-lb with Hytrel sleeve
Torque rate
2,340 (in-lbs) with EPDM or Neoprene sleeve; 7,200 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 9S11116 9SX1 11/16 SF Flange is a high-quality shaft coupling designed for optimal power transmission in various industrial applications. This complete unit features advanced engineering from TB Woods, a leader in the power transmission industry, ensuring reliability and durability for your operational needs.
Key Features
| Robust Construction | Engineered with premium materials to withstand high torque loads and harsh operating conditions, ensuring long-lasting performance. |
|---|---|
| Precision Design | The 9S11116 flange is crafted for easy alignment and installation, promoting seamless integration into existing systems. |
| Versatile Compatibility | Suitable for a wide range of applications across industries such as food and beverage, energy, and material handling. |
| Enhanced Performance | Designed to minimize vibration and noise, contributing to a smoother operation and reducing wear on connected components. |
| Maintenance-Friendly | The unit's design allows for quick inspection and maintenance, reducing downtime and operational costs. |
Applications
| Industrial Machinery | Ideal for use in conveyors, mixers, and pumps where reliable power transmission is critical. |
|---|---|
| Power Generation | Effectively used in applications within energy sectors, ensuring efficient operation in power generation systems. |
| Material Handling Equipment | Perfect for equipment that requires robust and durable couplings to handle varying loads and speeds. |
Benefits
| Increased Reliability | TB Woods' reputation for quality ensures a dependable coupling that minimizes failures and enhances operational efficiency. |
|---|---|
| Cost-Effective Operations | The design and durability of the 9S11116 coupling contribute to lower maintenance requirements and reduced total cost of ownership. |
| Improved Performance | Enhanced power transmission efficiency leads to better overall system performance, making it a smart choice for industrial applications. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read more
#2084400
Brand
Toshiba
Model
M305WTAL11E-C
#96915091
Brand
BLACKSTAR
Model
BLS 3JE SLEEVE
#2084242
Brand
Toshiba
Model
4003WTQK11F-A
#2084334
Brand
Toshiba
Model
J3007NLFUI-C
#2084151
Brand
Toshiba
Model
J4508GLF3I-C
#2084040
Brand
Toshiba
Model
6008WPAL11E-A
#2084168
Brand
Toshiba
Model
M205WPAL11E-C
#2084424
Brand
Toshiba
Model
M458WTAL11E-C
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.