We never sell your data to third parties
TB Woods 9C158 Sure-Flex Plus Type C flange with 1-5/8" finished bore for a Size 9 elastomeric sleeve coupling. High-strength cast-iron construction with setscrew and clamp. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 2,340 in-lb continuous torque with EPDM/Neoprene and 7,200 in-lb with Hytrel.
MODEL 9C158
Contact supplier for technical support on: 888-829-6637
$310.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
1 5/8 in
Bore size (in)
1-5/8
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Capscrew size
3/8 24 NF X 1 1/4
Capscrew size (in)
3/8 24 NF X 1 1/4
Capscrew torque requirement
55 in-lbs
Capscrew torque requirment (ft lbs)
55
Component WR2 (lbs ft2)
0.2758
Component WR²
0.2758
Construction type
Finish bore with keyway
Coupling size
9
Dimension (in) (C)
3
Dimension (in) (D)
7.5
Dimension (in) (H)
4.25
Dimension (in) (S)
1/2
Dimension (in.) (E)
1.97
Flange diameter
6.35
Horsepower Rating at 100 RPM
57
Keyseat (in)
3/8 x 3/16
Keyseat size
3/8 in x 3/16 in
Length through bore
3
Material type
High strength cast iron
Max angular gap misalignment
0.109 (in) with EPDM/Neoprene Sleeves and 0.028 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
2.875
Max parallel misalignment
11
Max RPM
3750
Max speed
3750
Min compatible bore size
0.4375
Outside diameter
7.5
Power rating at 100 RPM
2.8 kW with EPDM or Neoprene sleeve, 8.5 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Clamp
Set screw distance
0.5
Setscrew length
1
Setscrew length (in)
1
Setscrew size, location
5/16 18 UNC, over keyseat
Setscrew torque requirement
13
Setscrew Torque Requirment (ft lbs)
13
SF flange length
1.03125
SF hub diameter
4.25
SF hub length
38
Torque
2,340 in-lb with EPDM or Neoprene sleeve, 7,200 in-lb with Hytrel sleeve
Torque rate
2,340 (in-lbs) with EPDM or Neoprene sleeve; 7,200 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 9C158 Sure-Flex Plus flange coupling is engineered for exceptional performance in various industrial applications. This high-quality coupling solution is designed to accommodate shaft misalignment while providing reliable torque transmission. Its robust construction and innovative elastomeric sleeves make it an ideal choice for power transmission needs in demanding environments.
Key Features
| Model | 9C158 Sure-Flex Plus |
|---|---|
| Compatibility | Designed for 5/8 shaft applications |
| Construction | Features proprietary elastomeric materials that enhance durability and performance |
| Misalignment Tolerance | Efficiently handles angular, parallel, and axial misalignment, improving system reliability |
| Maintenance-Friendly | Designed for easy installation and maintenance, reducing downtime |
Applications
| Industrial Machinery | Suitable for conveyors, pumps, and fans across multiple sectors |
|---|---|
| Food and Beverage | Ideal for applications requiring sanitary conditions and reliable operation |
| Energy Sector | Utilized in various energy generation and distribution systems for optimal power transmission |
| Material Handling | Enhances performance in automated and manual material handling systems |
Benefits
| Increased Reliability | Reduces the risk of downtime due to misalignment, ensuring continuous operation |
|---|---|
| Durability | Proprietary elastomeric materials provide enhanced resistance to wear and tear |
| Cost-Effective | Low maintenance requirements lead to significant savings over the product lifecycle |
| Versatile Use | Versatile coupling design suitable for a wide range of applications in various industries |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | STIEBER |
| Model | D2(AL80) |
| Brand | STIEBER |
| Model | G2(RIZ60) |
| Brand | STIEBER |
| Model | DC2776 |
| Brand | STIEBER |
| Model | DC7969C(5C) |
| Brand | NSK Bearings |
| Model | 22213CAMC4 |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.