We never sell your data to third parties
TB Woods 13S31516 Sure-Flex Plus Type S flange for Size 13 elastomeric sleeve couplings with a 3-15/16" finished bore and 1" x 1/2" keyseat. High-strength cast-iron construction rated for 14,750 in-lb continuous torque with EPDM or Neoprene sleeves and 47,268 in-lb with Hytrel sleeves at 2,400 rpm maximum.
MODEL 13S31516
Contact supplier for technical support on: 888-829-6637
$354.51 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
3 15/16 in
Bore size (in)
3 15/16
Bore tolerance
+.0005 to +.0020
Bore tolerance (in)
+0.0005 to +0.0020
Component WR2 (lbs ft2)
4.2752
Component WR²
4.2752
Construction type
Finish bore with keyway
Coupling size
13
Dimension (in) (C)
4 3/8 in
Dimension (in) (D)
11.75
Dimension (in) (H)
6 3/4
Dimension (in) (S)
3/4
Dimension (in) (T)
1 31/32
Dimension (in.) (E)
1-5/16
Flange diameter
11.75
Horsepower Rating at 100 RPM
68
Keyseat (in)
1 x 1/2
Keyseat size
1 in x 1/2 in
Length through bore
4.375
Material type
High strength cast iron
Max angular gap misalignment
0.195 (in) with EPDM/Neoprene Sleeves and 0.050 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
4.5
Max parallel misalignment
19
Max RPM
2400
Max speed
2400
Min compatible bore size
1
Outside diameter
11.75
Power rating at 100 RPM
56 kW with EPDM or Neoprene sleeve, 17 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.75
Setscrew length
0.75
Setscrew length (in)
3/4
Setscrew size, location
5/8 11 UNC, One over KS and at 90 Degrees
Setscrew torque requirement
100
Setscrew Torque Requirment (ft lbs)
100
SF flange length
1.96875
SF hub diameter
6.75
SF hub length
29
Torque
14,750 in-lb with EPDM or Neoprene sleeve, 47,268 in-lb with Hytrel sleeve
Torque rate
14,750 (in-lbs) with EPDM or Neoprene sleeve; 47,268 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 13S31516 13SX3 15/16 SF Flange is a premium shaft coupling designed for high-performance applications. Engineered to provide reliable power transmission, this coupling features a robust construction that ensures durability and operational efficiency in various industrial settings.
Key Features
| Construction Material | Fabricated from high-quality materials for enhanced strength and longevity. |
|---|---|
| Design | Features a 15/16 inch flange for secure mounting and alignment, ensuring optimal performance. |
| Load Capacity | Designed to handle substantial loads, making it ideal for heavy-duty applications. |
| Compatibility | Works seamlessly with TB Woods' Sure-Flex Plus elastomeric couplings for enhanced flexibility and shock absorption. |
| Maintenance | Engineered for low maintenance, reducing downtime and operational costs. |
Applications
| Industrial Power Transmission | Perfect for use in various sectors, including food and beverage, energy, and material handling. |
|---|---|
| Machinery Alignment | Ensures precise alignment in motor-driven equipment, enhancing efficiency and reducing wear. |
| Heavy-Duty Equipment | Suitable for applications where high torque and load capacity are required. |
Benefits
| Enhanced Durability | Built to withstand harsh operating conditions, providing a long service life. |
|---|---|
| Improved Efficiency | Reduces energy loss through effective power transmission, promoting smoother operations. |
| Cost-Effective | The low maintenance design and longevity contribute to significant savings in operational costs. |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | NK North America Inc. |
| Model | K1469.104 |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.