We never sell your data to third parties
TB Woods 6S158 Sure-Flex Plus Type S flange for Size 6 elastomeric sleeve couplings with a 1-5/8" finished bore and 3/8" x 1/8" keyway. High-strength cast-iron construction rated for 585 in-lb continuous torque with EPDM or Neoprene sleeves and 1,800 in-lb with Hytrel sleeves at up to 6,000 RPM.
MODEL 6S158
Contact supplier for technical support on: 888-829-6637
$41.33 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore size
1 5/8 in
Bore size (in)
1-5/8
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.0265
Component WR²
0.0265
Construction type
Finish bore with keyway
Coupling size
6
Dimension (in) (C)
1-5/16
Dimension (in) (D)
4.00
Dimension (in) (H)
2-1/2
Dimension (in) (S)
5/16
Dimension (in) (T)
25/32
Dimension (in.) (E)
17/32
Flange diameter
4
Horsepower Rating at 100 RPM
47
Keyseat (in)
3/8 x 1/8
Keyseat size
3/8 in x 1/8 in
Length through bore
1.3125
Material type
High strength cast iron
Max angular gap misalignment
0.070 (in) with EPDM/Neoprene Sleeves and 0.016 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
1.875
Max parallel misalignment
4
Max RPM
6000
Max speed
6000
Min compatible bore size
0.625
Outside diameter
4
Power rating at 100 RPM
0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.3125
Setscrew length
0.3125
Setscrew length (in)
5/16
Setscrew size, location
5/16 18 UNC, One over KS and at 90 degrees
Setscrew torque requirement
13
Setscrew Torque Requirment (ft lbs)
13
SF flange length
0.78125
SF hub diameter
2.5
SF hub length
17/32
Torque
585 in-lb with EPDM or Neoprene sleeve, 1,800 in-lb with Hytrel sleeve
Torque rate
585 (in-lbs) with EPDM or Neoprene sleeve; 1,800 (in-lbs) with Hytrel sleeve
Key Features • Design: The 6S158 flange coupling features a robust construction that ensures optimal load distribution and stability, minimizing the risk of misalignment during operation. • Material: Made from high-quality materials, the coupling is designed to withstand extreme operating conditions, ensuring longevity and reduced maintenance needs. • Size and Compatibility: The coupling is sized at 5/8 inches, making it suitable for a wide range of applications and compatible with various shaft sizes. • Performance: Engineered for high torque applications, the 6S158 provides efficient power transfer, contributing to enhanced operational efficiency. • Certification: Manufactured by TB Woods, a trusted name in the power transmission industry, ensuring that the product meets stringent quality standards.
Applications • Industrial Machinery: Ideal for connecting shafts in various types of industrial machinery, enhancing operational performance and reliability. • Energy Sector: Commonly used in power generation and distribution systems for its efficient power transmission capabilities. • Food and Beverage Processing: Suitable for applications requiring hygiene and safety, ensuring compliance with industry standards.
Benefits • Increased Reliability: The TB Woods 6S158 coupling is designed for long-lasting performance, reducing the frequency of replacements and maintenance. • Enhanced Efficiency: Its precision design minimizes energy loss during power transmission, resulting in lower operational costs. • Versatility: The coupling's compatibility with multiple shaft sizes and systems makes it a versatile choice for various applications. --- *Product information compiled with AI assistance for reference purposes.*
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read more
#250023
Brand
Martin Sprocket
Model
6S 1 5/8
#351155
Brand
TB Woods
Model
34XXH200
#5051997
Brand
Teco-Westinghouse
Model
P4004
#265923
Brand
Martin Sprocket
Model
TB24H100
#2283645
Brand
Browning
Model
1089754
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.