We never sell your data to third parties
TB Woods 6S114 Sure-Flex Plus Type S flange with 1-1/4" finished bore for Size 6 elastomeric sleeve couplings. High-strength cast-iron construction with 5/16-18 UNC setscrew over keyway. Rated 585 in-lb continuous torque with EPDM or Neoprene sleeves and 1,800 in-lb with Hytrel sleeves, up to 6,000 RPM.
MODEL 6S114
Contact supplier for technical support on: 888-829-6637
$40.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
1 1/4 in
Bore size (in)
1 1/4
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.0276
Component WR²
0.0276
Construction type
Finish bore with keyway
Coupling size
6
Dimension (in) (C)
1-5/8
Dimension (in) (D)
4.00
Dimension (in) (H)
2-1/2
Dimension (in) (S)
5/16
Dimension (in) (T)
25/32
Dimension (in.) (E)
17/32
Flange diameter
4
Horsepower Rating at 100 RPM
47
Keyseat (in)
1/4 x 1/8
Keyseat size
1/4 in x 1/8 in
Length through bore
1.625
Material type
High strength cast iron
Max angular gap misalignment
0.070 (in) with EPDM/Neoprene Sleeves and 0.016 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
1.875
Max parallel misalignment
4
Max RPM
6000
Max speed
6000
Min compatible bore size
0.625
Outside diameter
4
Power rating at 100 RPM
0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.3125
Setscrew length
0.5
Setscrew length (in)
1/2
Setscrew size, location
5/16 18 UNC, One over KS and at 90 degrees
Setscrew torque requirement
13
Setscrew Torque Requirment (ft lbs)
13
SF flange length
0.78125
SF hub diameter
2.5
SF hub length
17/32
Torque
585 in-lb with EPDM or Neoprene sleeve, 1,800 in-lb with Hytrel sleeve
Torque rate
585 (in-lbs) with EPDM or Neoprene sleeve; 1,800 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 6S114 6SX1 1/4 SF Flange is a high-performance coupling designed to provide reliable power transmission in various industrial applications. Engineered with precision and durability in mind, this coupling is an essential component for connecting shafts while accommodating misalignment and reducing vibration.
Key Features
| Robust Construction | Made from high-quality materials to withstand rigorous operating conditions and ensure longevity. |
|---|---|
| Flange Design | The flange configuration allows for easy installation and secure mounting, facilitating a stable connection between shafts. |
| Flexible Performance | This coupling effectively accommodates angular and parallel misalignment, enhancing operational efficiency. |
| High Torque Capacity | Designed to handle significant torque loads, making it suitable for demanding applications in various industries. |
| Compatibility | Standard dimensions ensure compatibility with a wide range of shaft sizes and configurations, promoting versatile applications. |
Applications
| Industrial Machinery | Ideal for use in conveyor systems, pumps, and fans where reliable connection and alignment are essential. |
|---|---|
| Material Handling | Frequently utilized in systems requiring efficient power transmission and minimal downtime. |
| Energy Sector | Suitable for power generation equipment, providing stability and performance in energy applications. |
| Manufacturing | Commonly found in manufacturing processes that rely on precise and dependable coupling solutions. |
Benefits
| Enhanced Reliability | The durable construction ensures a long service life, reducing the need for frequent replacements. |
|---|---|
| Operational Efficiency | The ability to accommodate misalignment minimizes wear on connected components, promoting smoother operation. |
| Easy Installation | The flange design simplifies the installation process, saving time and labor costs during setup. |
| Reduced Maintenance Costs | Innovative design features contribute to lower maintenance requirements, allowing for increased productivity. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read more
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.