We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
TB Woods 6S1716 Sure-Flex Plus Type S flange with 1-7/16" finished bore for Size 6 elastomeric sleeve couplings. High-strength cast-iron construction with setscrew locking and 3/8" x 3/16" keyseat. Rated 585 in-lb continuous torque with EPDM or Neoprene sleeves and 1,800 in-lb with Hytrel sleeves, up to 6,000 RPM.
MODEL 6S1716
Contact supplier for technical support on: 888-829-6637
$40.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore size
1 7/16 in
Bore size (in)
1-7/16
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.0276
Component WR²
0.0276
Construction type
Finish bore with keyway
Coupling size
6
Dimension (in) (C)
1-5/8
Dimension (in) (D)
4.00
Dimension (in) (H)
2-1/2
Dimension (in) (S)
5/16
Dimension (in) (T)
25/32
Dimension (in.) (E)
17/32
Flange diameter
4
Horsepower Rating at 100 RPM
47
Keyseat (in)
3/8 x 3/16
Keyseat size
3/8 in x 3/16 in
Length through bore
1.625
Material type
High strength cast iron
Max angular gap misalignment
0.070 (in) with EPDM/Neoprene Sleeves and 0.016 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
1.875
Max parallel misalignment
4
Max RPM
6000
Max speed
6000
Min compatible bore size
0.625
Outside diameter
4
Power rating at 100 RPM
0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.3125
Setscrew length
0.375
Setscrew length (in)
3/8
Setscrew size, location
5/16 18 UNC, One over KS and at 90 degrees
Setscrew torque requirement
13
Setscrew Torque Requirment (ft lbs)
13
SF flange length
0.78125
SF hub diameter
2.5
SF hub length
17/32
Torque
585 in-lb with EPDM or Neoprene sleeve, 1,800 in-lb with Hytrel sleeve
Torque rate
585 (in-lbs) with EPDM or Neoprene sleeve; 1,800 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 6S1716 6SX1 7/16 SF Flange is a high-performance shaft coupling designed to provide exceptional torque transmission and flexibility in various industrial applications. Constructed with precision and engineered for durability, this coupling is an essential component for ensuring efficient power transmission in powertrain systems.
Key Features
| Robust Design | Features a rugged construction that enhances durability and resistance to wear, ensuring long operational life in demanding environments. |
|---|---|
| Elastomeric Sleeves | Utilizes advanced Sure-Flex Plus elastomeric sleeves that provide excellent shock absorption and misalignment compensation. |
| High Torque Capacity | Capable of transmitting significant torque loads, making it suitable for heavy-duty applications in diverse industries. |
| Easy Installation | Designed for quick and straightforward installation, minimizing downtime and maintenance efforts. |
| Versatile Compatibility | Compatible with various shaft sizes and types, making it ideal for a wide range of applications. |
Applications
| Industrial Machinery | Perfectly suited for connecting motors to pumps, fans, and other equipment in manufacturing plants. |
|---|---|
| Material Handling | Ideal for use in conveyor systems and other material handling equipment, ensuring smooth operation and reduced wear. |
| Food and Beverage Industry | Engineered to meet the stringent hygiene standards required in food processing applications, providing reliable performance without compromising cleanliness. |
Benefits
| Enhanced Performance | The elastomeric design minimizes vibration and noise, leading to smoother operation and increased efficiency. |
|---|---|
| Maintenance Savings | Durable construction reduces the need for frequent replacements, translating into lower maintenance costs and longer service intervals. |
| Reliability | Proven performance in critical applications ensures peace of mind, knowing that your power transmission systems are built to last. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | Jason Industrial |
| Model | D2240-8M-30 |
| Brand | Jason Industrial |
| Model | D920-8M-20 |
| Brand | Consolidated Bearings |
| Model | SD-3168 |
| Brand | Jason Industrial |
| Model | D1280-8MS-50 |
| Brand | Consolidated Bearings |
| Model | 2312 M C/3 |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.