We never sell your data to third parties
TB Woods 6S34 Sure-Flex Plus Type S flange with 3/4" finished bore for Size 6 elastomeric sleeve couplings. High-strength cast-iron construction with setscrew locking and 3/16" x 3/32" keyseat. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated 585 in-lb continuous torque with EPDM or Neoprene and 1,800 in-lb with Hytrel.
MODEL 6S34
Contact supplier for technical support on: 888-829-6637
$40.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
3/4 in
Bore size (in)
3/4
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.0276
Component WR²
0.0276
Construction type
Finish bore with keyway
Coupling size
6
Dimension (in) (C)
1-5/8
Dimension (in) (D)
4.00
Dimension (in) (H)
2-1/2
Dimension (in) (S)
5/16
Dimension (in) (T)
25/32
Dimension (in.) (E)
17/32
Flange diameter
4
Horsepower Rating at 100 RPM
47
Keyseat (in)
3/16 x 3/32
Keyseat size
3/16 in x 3/32 in
Length through bore
1.625
Material type
High strength cast iron
Max angular gap misalignment
0.070 (in) with EPDM/Neoprene Sleeves and 0.016 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
1.875
Max parallel misalignment
4
Max RPM
6000
Max speed
6000
Min compatible bore size
0.625
Outside diameter
4
Power rating at 100 RPM
0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.3125
Setscrew length
0.75
Setscrew length (in)
3/4
Setscrew size, location
5/16 18 UNC, One over KS and at 90 degrees
Setscrew torque requirement
13
Setscrew Torque Requirment (ft lbs)
13
SF flange length
0.78125
SF hub diameter
2.5
SF hub length
17/32
Torque
585 in-lb with EPDM or Neoprene sleeve, 1,800 in-lb with Hytrel sleeve
Torque rate
585 (in-lbs) with EPDM or Neoprene sleeve; 1,800 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 6S34 6SX3/4 SF Flange coupling is engineered for high-performance applications in various industrial sectors. This complete unit is part of the trusted Sure-Flex coupling line, designed to provide superior flexibility and reliable power transmission. Its innovative design and quality materials ensure optimal performance, making it an essential component for any mechanical drive system.
Key Features
| High-Quality Construction | Manufactured with durable materials that withstand harsh operational conditions, ensuring longevity and reliability. |
|---|---|
| Flexible Design | Features elastomeric sleeves that accommodate misalignment and reduce vibration, enhancing system efficiency and lifespan. |
| Standardized Dimensions | The coupling is designed to fit standard shaft sizes, facilitating easy installation and compatibility with existing systems. |
| Maintenance-Friendly | Engineered for minimal wear, the coupling significantly reduces maintenance needs, leading to cost savings over time. |
| Proven Performance | Part of the Sure-Flex series, this coupling is recognized for its robust performance in various industries, including food processing, energy, and material handling. |
Applications
| Industrial Machinery | Ideal for coupling motors to gearboxes and other drive components in manufacturing equipment. |
|---|---|
| Material Handling Systems | Perfect for applications where flexibility and reliability are crucial, such as conveyors and automated systems. |
| Energy Sector | Used in power generation and distribution systems, ensuring efficient power transmission across various equipment. |
Benefits
| Enhanced System Performance | The unique design minimizes backlash and vibration, leading to smoother operation and lower energy consumption. |
|---|---|
| Reduced Downtime | With its durable construction and low maintenance requirements, the TB Woods 6S34 reduces the likelihood of operational interruptions. |
| Cost-Effective Solution | By minimizing wear and tear, this coupling extends the life of connected equipment, resulting in lower replacement and repair costs. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | Boston Gear |
| Model | DT115-010-0-RM115-88 |
| Brand | Nachi Bearing |
| Model | 6301-2NSE9C3 |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.