We never sell your data to third parties
TB Woods 10S50MM Sure-Flex Plus Type S flange with 50 mm finished bore for Size 10 elastomeric sleeve couplings. High-strength cast-iron construction with 14 mm x 3.8 mm keyseat. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated 422 Nm torque with EPDM/Neoprene and 1,282 Nm with Hytrel at 3600 max RPM.
MODEL 10S50MM
Contact supplier for technical support on: 888-829-6637
$132.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
50 mm
Bore size (mm)
50 mm
Bore tolerance
+.025 to +.050
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.4853
Component WR²
0.4853
Construction type
Finish bore with keyway
Coupling size
10
Dimension (in) (C)
2 23/32
Dimension (in) (D)
7.5
Dimension (in) (H)
4- 3/8
Dimension (in) (S)
7/16
Dimension (in) (T)
1 7/32
Dimension (in.) (E)
13/16
Flange diameter
7.5
Horsepower Rating at 100 RPM
61
Keyseat (mm)
14mm x 3.8mm
Keyseat size
14 mm x 3.8 mm
Length through bore
69
Material type
High strength cast iron
Max angular gap misalignment
3.21 (mm) with EPDM/Neoprene Sleeves and 0.81 (mm) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
85
Max parallel misalignment
12
Max RPM
3600
Max speed
3600
Min compatible bore size
12
Outside diameter
191
Power rating at 100 RPM
4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
16
Setscrew length
16
Setscrew length (mm)
16 mm
Setscrew size, location
M10 x 1.50, One over KS and at 90 Degrees
Setscrew torque requirement
31
Setscrew Torque Requirment (ft lbs)
23
SF flange length
31
SF hub diameter
111
SF hub length
21
Torque
422 Nm with EPDM or Neoprene sleeve, 1,282 Nm with Hytrel sleeve
Torque rate
422 (Nm) with EPDM or Neoprene sleeve; 1,282 (Nm) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 10S50MM SF Flange is a high-performance shaft coupling designed to provide reliable and efficient power transmission in various industrial applications. Engineered with precision, this coupling ensures optimal alignment and torque transmission, making it ideal for demanding environments.
Key Features
| Durable Construction | Made from high-strength materials, the 10S50MM coupling offers exceptional resistance to wear and fatigue, ensuring long-lasting performance. |
|---|---|
| Precision Engineering | The design features precise tolerances that enhance coupling efficiency and minimize vibration, contributing to smoother operation. |
| Versatile Compatibility | Designed to fit a wide range of shafts, the coupling easily integrates with existing systems, making it a versatile choice for various applications. |
| Easy Installation | This flange coupling is designed for straightforward installation, reducing downtime and allowing for quick replacements when needed. |
| Proven Performance | With a legacy of engineering excellence from TB Woods, this coupling is backed by decades of industry expertise and reliability. |
Applications
| Industrial Equipment | Ideal for use in food and beverage processing, material handling, and other industrial machinery requiring dependable power transmission. |
|---|---|
| Energy Sector | Suitable for applications in renewable energy systems, enhancing the efficiency of wind turbines and solar power equipment. |
| Manufacturing | Widely used in manufacturing processes that demand robust coupling solutions to withstand heavy loads and dynamic movements. |
Benefits
| Enhanced Efficiency | The precise engineering of the 10S50MM coupling reduces energy loss, maximizing system performance while minimizing operational costs. |
|---|---|
| Increased Reliability | Built to endure tough operating conditions, this coupling minimizes the risk of failure, ensuring continuous operation and reducing maintenance costs. |
| Flexible Application | Its compatibility with various shaft sizes and types makes it an adaptable solution for diverse industrial applications. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | INA Bearing |
| Model | K35X40X17A |
| Brand | INA Bearing |
| Model | LFR5204-16NPP |
| Brand | Jason Industrial |
| Model | D1190-14M-20 |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.