We never sell your data to third parties
TB Woods 6SMPB Sure-Flex Plus Type S flange with 5/8" finished bore for Size 6 elastomeric sleeve couplings. High-strength cast-iron construction, rated for 585 in-lb continuous torque with EPDM or Neoprene sleeves and 1,800 in-lb with Hytrel sleeves. Maximum speed 6,000 RPM.
MODEL 6SMPB
Contact supplier for technical support on: 888-829-6637
$40.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
5/8 in
Bore size (in)
5/8
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.0276
Component WR²
0.0276
Construction type
Finish bore
Coupling size
6
Dimension (in) (C)
1-5/8
Dimension (in) (D)
4.00
Dimension (in) (H)
2-1/2
Dimension (in) (S)
5/16
Dimension (in) (T)
25/32
Dimension (in.) (E)
17/32
Flange diameter
4
Horsepower Rating at 100 RPM
47
Keyseat (in)
No KS, Suitable for reboring
Keyseat size
No KS, Suitable for reboring
Length through bore
1.625
Material type
High strength cast iron
Max angular gap misalignment
0.070 (in) with EPDM/Neoprene Sleeves and 0.016 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
1.875
Max parallel misalignment
4
Max RPM
6000
Max speed
6000
Min compatible bore size
0.625
Outside diameter
4
Power rating at 100 RPM
0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.3125
Setscrew length
0.3125
Setscrew length (in)
5/16
Setscrew size, location
5/16 18 UNC, One over KS and at 90 degrees
Setscrew torque requirement
13
Setscrew Torque Requirment (ft lbs)
13
SF flange length
0.78125
SF hub diameter
2.5
SF hub length
17/32
Torque
585 in-lb with EPDM or Neoprene sleeve, 1,800 in-lb with Hytrel sleeve
Torque rate
585 (in-lbs) with EPDM or Neoprene sleeve; 1,800 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 6SMPB 6SX5/8 Mpb SF Flange is a high-quality shaft coupling designed to provide reliable power transmission in various industrial applications. This complete unit is engineered to accommodate misalignment and deliver exceptional performance in demanding environments.
Key Features
| Durable Construction | Made from high-strength materials to withstand rigorous operational conditions and ensure longevity. |
|---|---|
| Elastomeric Design | Features a Sure-Flex elastomeric sleeve that absorbs shock loads and reduces vibration, enhancing overall system performance. |
| Versatile Compatibility | Designed to fit a wide range of shaft sizes and configurations, making it ideal for various applications. |
| Easy Installation | The flange design allows for straightforward mounting and alignment, minimizing installation time and reducing downtime. |
| High Torque Capacity | Engineered to handle significant torque loads, ensuring reliable power transmission in even the most demanding settings. |
Applications
| Industrial Machinery | Perfect for use in conveyors, mixers, and other machinery where reliable power transmission is critical. |
|---|---|
| Food and Beverage Industry | Suitable for applications requiring hygienic design and compliance with industry standards. |
| Material Handling | Ideal for various material handling systems where flexibility and durability are essential. |
| Energy Sector | Effective in applications within power generation and renewable energy systems, providing robust performance. |
Benefits
| Enhanced Performance | The elastomeric design minimizes wear and tear on connected components, extending the lifespan of machinery. |
|---|---|
| Reduced Maintenance Costs | The reliable construction and design decrease the frequency of repairs and replacements, translating to lower operational costs. |
| Improved Operational Efficiency | By accommodating misalignment and absorbing shocks, this coupling enhances the overall efficiency of the system. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read more
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.