We never sell your data to third parties
TB Woods 10C212 Sure-Flex Plus Type C flange with 2-1/2" finished bore for a Size 10 elastomeric sleeve coupling. High-strength cast-iron construction with clamp-style setscrew. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 3,735 in-lb continuous torque with EPDM/Neoprene and 11,350 in-lb with Hytrel.
MODEL 10C212
Contact supplier for technical support on: 888-829-6637
$552.36 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
2 1/2 in
Bore size (in)
2-1/2
Bore tolerance
+.0005 to +.0020
Bore tolerance (in)
+0.0005 to +0.0020
Capscrew size
4
Capscrew size (in)
1/2 20 NF X 2
Capscrew torque requirement
16
Capscrew torque requirment (ft lbs)
130
Component WR2 (lbs ft2)
0.6431
Component WR²
0.6431
Construction type
Finish bore with keyway
Coupling size
10
Dimension (in) (C)
3.5
Dimension (in) (D)
7.5
Dimension (in) (H)
5
Dimension (in) (S)
5/8
Dimension (in.) (E)
2.28
Flange diameter
7.5
Horsepower Rating at 100 RPM
61
Keyseat (in)
5/8 x 5/16
Keyseat size
5/8 in x 5/16 in
Length through bore
3.5
Material type
High strength cast iron
Max angular gap misalignment
0.128 (in) with EPDM/Neoprene Sleeves and 0.032 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
3.375
Max parallel misalignment
12
Max RPM
3600
Max speed
3600
Min compatible bore size
0.4375
Outside diameter
7.5
Power rating at 100 RPM
4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Clamp
Set screw distance
0.625
Setscrew length
0.75
Setscrew length (in)
3/4
Setscrew size, location
5/16 18 UNC, over keyseat
Setscrew torque requirement
13
Setscrew Torque Requirment (ft lbs)
13
SF flange length
1.21875
SF hub diameter
5
SF hub length
42
Torque
3,735 in-lb with EPDM or Neoprene sleeve, 11,350 in-lb with Hytrel sleeve
Torque rate
3,735 (in-lbs) with EPDM or Neoprene sleeve; 11,350 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 10C212 10CX2 1/2 SF Flange coupling is a premier solution designed for industrial power transmission applications. Engineered for durability and high performance, this coupling effectively connects shafts while accommodating misalignments and reducing wear.
Key Features
| High-Quality Construction | Made from robust materials to ensure longevity and resistance to wear, making it ideal for demanding environments. |
|---|---|
| Versatile Design | The 10C212 coupling supports a variety of applications, accommodating shaft sizes and configurations for enhanced flexibility. |
| Enhanced Performance | Utilizes proprietary elastomeric materials that provide superior shock absorption and vibration dampening capabilities. |
| Easy Installation | Designed with user-friendliness in mind, allowing for quick assembly and disassembly without the need for special tools. |
| Compatibility | This coupling is compatible with a wide range of TB Woods products, ensuring seamless integration into existing systems. |
Applications
| Industrial Machinery | Ideal for use in manufacturing equipment, conveyor systems, and pumps where reliable power transmission is crucial. |
|---|---|
| Food and Beverage Industry | Perfect for applications requiring strict hygiene standards, thanks to its durable and easy-to-clean design. |
| Energy Sector | Suited for power generation equipment and transmission systems, ensuring efficient operation under various load conditions. |
| Material Handling | Effectively used in systems that require precise alignment and consistent performance under load. |
Benefits
| Improved Reliability | Reduces the risk of downtime due to its robust design and material quality, ensuring continuous operation in critical applications. |
|---|---|
| Cost-Efficiency | The advanced elastomeric design leads to lower maintenance costs and longer service life, providing significant savings over time. |
| Enhanced Performance | Offers better torque transmission and load distribution, leading to improved efficiency in power transfer. |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | Consolidated Bearings |
| Model | LER-136 |
| Brand | Jason Industrial |
| Model | XPA1682 |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.