We never sell your data to third parties
TB Woods 10S2 Sure-Flex Plus Type S flange for Size 10 elastomeric sleeve couplings with a 2" finished bore and 1/2" x 1/4" keyway. High-strength cast-iron construction rated for 3,735 in-lb torque with EPDM or Neoprene sleeves and 11,350 in-lb with Hytrel sleeves at up to 3,600 RPM.
MODEL 10S2
Contact supplier for technical support on: 888-829-6637
$123.48 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore size
2 in
Bore size (in)
2
Bore tolerance
+.0005 to +.0015
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.4853
Component WR²
0.4853
Construction type
Finish bore with keyway
Coupling size
10
Dimension (in) (C)
2 23/32
Dimension (in) (D)
7.5
Dimension (in) (H)
4- 3/8
Dimension (in) (S)
7/16
Dimension (in) (T)
1 7/32
Dimension (in.) (E)
13/16
Flange diameter
7.5
Horsepower Rating at 100 RPM
61
Keyseat (in)
1/2 x 1/4
Keyseat size
1/2 in x 1/4 in
Length through bore
2.71875
Material type
High strength cast iron
Max angular gap misalignment
0.128 (in) with EPDM/Neoprene Sleeves and 0.032 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
3.375
Max parallel misalignment
12
Max RPM
3600
Max speed
3600
Min compatible bore size
0.4375
Outside diameter
7.5
Power rating at 100 RPM
4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.4375
Setscrew length
0.75
Setscrew length (in)
3/4
Setscrew size, location
1/2 13 UNC, One over KS and at 90 Degrees
Setscrew torque requirement
23
Setscrew Torque Requirment (ft lbs)
23
SF flange length
1.21875
SF hub diameter
4.375
SF hub length
18
Torque
3,735 in-lb with EPDM or Neoprene sleeve, 11,350 in-lb with Hytrel sleeve
Torque rate
3,735 (in-lbs) with EPDM or Neoprene sleeve; 11,350 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 10S2 10SX2 SF Flange is a high-performance coupling designed for a wide range of industrial applications. Known for its durability and reliability, this coupling is an essential component in power transmission systems, ensuring effective torque transfer and alignment between shafts.
Key Features
| High-Quality Construction | Manufactured with premium materials, this flange coupling provides exceptional strength and reliability, suitable for heavy-duty applications. |
|---|---|
| Versatile Compatibility | Designed to fit various shaft sizes, the 10S2 coupling can be easily integrated into existing systems, enhancing operational efficiency. |
| Enhanced Performance | The coupling features a unique elastomeric design that accommodates misalignment while reducing vibration and noise during operation. |
| Maintenance-Friendly | Engineered for longevity, the 10S2 coupling minimizes wear and tear, resulting in reduced maintenance costs and downtime. |
| Proven Innovation | Backed by TB Woods' extensive expertise, this product exemplifies cutting-edge engineering and manufacturing processes. |
Applications
| Industrial Machinery | Ideal for use in conveyor systems, pumps, and compressors where reliable torque transmission is crucial. |
|---|---|
| Material Handling | Perfect for applications in the food and beverage industry, energy sector, and other material handling environments. |
| Power Transmission | Effectively connects shafts in various machinery, ensuring smooth operation and efficient energy transfer. |
Benefits
| Cost Efficiency | Lower maintenance and replacement costs due to the durability of the coupling lead to significant savings over time. |
|---|---|
| Operational Reliability | Ensures consistent performance, reducing the risk of failure and enhancing overall system productivity. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
#249235
Brand
Martin Sprocket
Model
10S 2
| Brand | Remke |
| Model | 110P0010N |
| Brand | Harwal |
| Model | .625 x .813 x .094BO |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.