We never sell your data to third parties
TB Woods 10S55MM Sure-Flex Plus Type S flange with 55 mm finished bore for Size 10 elastomeric sleeve couplings. High-strength cast-iron construction with 16 mm x 4.3 mm keyseat and M10 x 1.50 setscrew. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 422 Nm continuous torque with EPDM or Neoprene and 1,282 Nm with Hytrel.
MODEL 10S55MM
Contact supplier for technical support on: 888-829-6637
$132.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore size
55 mm
Bore size (mm)
55 mm
Bore tolerance
+.030 to +.060
Bore tolerance (in)
+0.0005 to +0.0020
Component WR2 (lbs ft2)
0.4541
Component WR²
0.4541
Construction type
Finish bore with keyway
Coupling size
10
Dimension (in) (C)
2 23/32
Dimension (in) (D)
7.5
Dimension (in) (H)
4- 3/8
Dimension (in) (S)
7/16
Dimension (in) (T)
1 7/32
Dimension (in.) (E)
13/16
Flange diameter
7.5
Horsepower Rating at 100 RPM
61
Keyseat (mm)
16mm x 4.3mm
Keyseat size
16 mm x 4.3 mm
Length through bore
69
Material type
High strength cast iron
Max angular gap misalignment
3.21 (mm) with EPDM/Neoprene Sleeves and 0.81 (mm) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
85
Max parallel misalignment
12
Max RPM
3600
Max speed
3600
Min compatible bore size
12
Outside diameter
191
Power rating at 100 RPM
4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
16
Setscrew length
16
Setscrew length (mm)
16 mm
Setscrew size, location
M10 x 1.50, One over KS and at 90 Degrees
Setscrew torque requirement
31
Setscrew Torque Requirment (ft lbs)
23
SF flange length
31
SF hub diameter
111
SF hub length
21
Torque
422 Nm with EPDM or Neoprene sleeve, 1,282 Nm with Hytrel sleeve
Torque rate
422 (Nm) with EPDM or Neoprene sleeve; 1,282 (Nm) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 10S55MM Sure-Flex Plus Shaft Coupling is a high-performance coupling designed to provide exceptional flexibility and reliability in various industrial applications. Engineered with advanced elastomeric materials, this coupling ensures optimal power transmission while accommodating misalignment and reducing shock loads.
Key Features
| Premium Construction | Made with proprietary elastomeric sleeves that enhance durability and performance under demanding conditions. |
|---|---|
| Versatile Compatibility | Designed to effectively connect shafts with a diameter of 55mm, making it suitable for a range of applications across different industries. |
| High Flexibility | The unique design allows for angular, parallel, and axial misalignment, promoting smooth operation and reduced wear on connected equipment. |
| Easy Installation | Features a simple design that enables quick mounting and dismounting, minimizing downtime during maintenance operations. |
| Maintenance-Free | This coupling requires no lubrication, providing a cost-effective solution for long-term performance without the hassle of regular upkeep. |
Applications
| Industrial Machinery | Ideal for use in material handling, conveyors, and other machinery where reliable torque transmission is critical. |
|---|---|
| Energy Sector | Effective in applications requiring robust performance under varying load conditions, such as pumps and compressors. |
| Food and Beverage Industry | Engineered to meet the stringent requirements of hygiene and reliability in food processing equipment. |
Benefits
| Increased Efficiency | The Sure-Flex Plus design minimizes energy loss during operation, enhancing overall system efficiency. |
|---|---|
| Enhanced Reliability | Engineered to withstand high shock loads and vibrations, ensuring longer life and reduced maintenance costs. |
| Cost Savings | By eliminating the need for regular maintenance and improving overall operational efficiency, users can achieve significant cost reductions over time. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | NK North America Inc. |
| Model | K0262.21CM6 |
| Brand | NK North America Inc. |
| Model | K0274.004 |
| Brand | NK North America Inc. |
| Model | K0650.150A52 |
| Brand | Electra/Grove Gear |
| Model | GR8240169.00 |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.