We never sell your data to third parties
TB Woods 10S234 Sure-Flex Plus Type S flange for Size 10 elastomeric sleeve couplings with a 2-3/4" finished bore and 5/8" x 5/16" keyway. High-strength cast-iron construction rated for 3,735 in-lb torque with EPDM or Neoprene sleeves and 11,350 in-lb with Hytrel sleeves at 3,600 RPM max.
MODEL 10S234
Contact supplier for technical support on: 888-829-6637
$132.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
2 3/4 in
Bore size (in)
2 3/4
Bore tolerance
+.0005 to +.0020
Bore tolerance (in)
+0.0005 to +0.0020
Component WR2 (lbs ft2)
0.4772
Component WR²
0.4772
Construction type
Finish bore with keyway
Coupling size
10
Dimension (in) (C)
2 23/32
Dimension (in) (D)
7.5
Dimension (in) (H)
4- 3/8
Dimension (in) (S)
7/16
Dimension (in) (T)
1 7/32
Dimension (in.) (E)
13/16
Flange diameter
7.5
Horsepower Rating at 100 RPM
61
Keyseat (in)
5/8 x 5/16
Keyseat size
5/8 in x 5/16 in
Length through bore
2.71875
Material type
High strength cast iron
Max angular gap misalignment
0.128 (in) with EPDM/Neoprene Sleeves and 0.032 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
3.375
Max parallel misalignment
12
Max RPM
3600
Max speed
3600
Min compatible bore size
0.4375
Outside diameter
7.5
Power rating at 100 RPM
4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.4375
Setscrew length
0.5
Setscrew length (in)
1/2
Setscrew size, location
1/2 13 UNC, One over KS and at 90 Degrees
Setscrew torque requirement
23
Setscrew Torque Requirment (ft lbs)
23
SF flange length
1.21875
SF hub diameter
4.375
SF hub length
18
Torque
3,735 in-lb with EPDM or Neoprene sleeve, 11,350 in-lb with Hytrel sleeve
Torque rate
3,735 (in-lbs) with EPDM or Neoprene sleeve; 11,350 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 10S234 10SX2 3/4 SF Flange is a high-quality shaft coupling designed for efficient power transmission in various industrial applications. Engineered with precision and durability in mind, this coupling is ideal for connecting shafts in mechanical systems where alignment and reliability are critical.
Key Features
| Durable Construction | Manufactured from high-grade materials to withstand harsh operating conditions, ensuring long-lasting performance. |
|---|---|
| Flange Design | Features a robust flange design that provides secure connections and reduces the risk of misalignment. |
| Versatile Compatibility | Compatible with a wide range of shafts and mechanical systems, making it ideal for diverse applications. |
| Easy Installation | Designed for straightforward installation, allowing for quick assembly and reduced downtime. |
| Maintenance-Friendly | Requires minimal maintenance, which helps in reducing operational costs and enhancing productivity. |
Applications
| Industrial Machinery | Perfect for use in various types of industrial machines, including conveyors, pumps, and compressors. |
|---|---|
| Material Handling | Commonly utilized in material handling systems where torque transmission is vital. |
| Energy Sector | Suitable for applications in the energy sector, where reliable and efficient power transmission is essential. |
Benefits
| Enhanced Performance | Ensures efficient torque transmission and minimizes energy loss, contributing to improved overall system performance. |
|---|---|
| Reliable Operation | Built to deliver consistent performance, reducing the likelihood of system failures and increasing operational reliability. |
| Cost-Effective | Its durable design reduces the frequency of replacements and maintenance needs, leading to significant cost savings over time. |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | INA Bearing |
| Model | K35X40X17A |
| Brand | INA Bearing |
| Model | LFR5204-16NPP |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreSKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.