We never sell your data to third parties
TB Woods 10S212 Sure-Flex Plus Type S flange with 2-1/2" finished bore for Size 10 elastomeric sleeve couplings. High-strength cast-iron construction with setscrew locking and 5/8" x 5/16" keyseat. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated 3,735 in-lb continuous torque with EPDM or Neoprene and 11,350 in-lb with Hytrel.
MODEL 10S212
Contact supplier for technical support on: 888-829-6637
$123.48 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
2 1/2 in
Bore size (in)
2-1/2
Bore tolerance
+.0005 to +.0020
Bore tolerance (in)
+0.0005 to +0.0020
Component WR2 (lbs ft2)
0.4772
Component WR²
0.4772
Construction type
Finish bore with keyway
Coupling size
10
Dimension (in) (C)
2 23/32
Dimension (in) (D)
7.5
Dimension (in) (H)
4- 3/8
Dimension (in) (S)
7/16
Dimension (in) (T)
1 7/32
Dimension (in.) (E)
13/16
Flange diameter
7.5
Horsepower Rating at 100 RPM
61
Keyseat (in)
5/8 x 5/16
Keyseat size
5/8 in x 5/16 in
Length through bore
2.71875
Material type
High strength cast iron
Max angular gap misalignment
0.128 (in) with EPDM/Neoprene Sleeves and 0.032 (in) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
3.375
Max parallel misalignment
12
Max RPM
3600
Max speed
3600
Min compatible bore size
0.4375
Outside diameter
7.5
Power rating at 100 RPM
4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
0.4375
Setscrew length
0.625
Setscrew length (in)
5/8
Setscrew size, location
1/2 13 UNC, One over KS and at 90 Degrees
Setscrew torque requirement
23
Setscrew Torque Requirment (ft lbs)
23
SF flange length
1.21875
SF hub diameter
4.375
SF hub length
18
Torque
3,735 in-lb with EPDM or Neoprene sleeve, 11,350 in-lb with Hytrel sleeve
Torque rate
3,735 (in-lbs) with EPDM or Neoprene sleeve; 11,350 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 10S212 10SX2 1/2 SF Flange is a high-performance shaft coupling designed for reliable power transmission across various industrial applications. Engineered with precision and quality, this coupling provides optimal flexibility and durability, ensuring seamless operation within your mechanical systems.
Key Features
| Construction Material | Crafted from high-quality materials that enhance strength and durability, suitable for demanding industrial environments. |
|---|---|
| Design Specification | Features a compact design with a flange coupling that allows for easy installation and alignment. |
| Performance Rating | Capable of handling high torque loads, ensuring efficient power transfer and reduced downtime. |
| Compatibility | Designed to fit standard shaft sizes, ensuring broad compatibility with existing systems and components. |
| Enhanced Durability | Incorporates advanced elastomeric materials to withstand harsh operating conditions and minimize wear. |
Applications
| Industrial Machinery | Ideal for use in a variety of machinery across sectors such as food and beverage, energy, and material handling. |
|---|---|
| Power Transmission Systems | Perfectly suited for applications requiring reliable coupling solutions to transmit power effectively. |
| Maintenance Operations | A reliable choice for maintenance teams looking to enhance system efficiency and longevity. |
Benefits
| Increased Reliability | Provides consistent performance under varying load conditions, reducing the risk of system failures. |
|---|---|
| Ease of Installation | User-friendly design facilitates quick installation and minimal downtime during maintenance. |
| Cost-Effective Solution | Designed for longevity, minimizing the need for frequent replacements and reducing overall maintenance costs. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | NK North America Inc. |
| Model | K1793.300051 |
| Brand | NK North America Inc. |
| Model | K1021.B0280X12 |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.