We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
TB Woods 7S32MM Sure-Flex Plus Type S flange for Size 7 elastomeric sleeve couplings with a 32 mm finished bore and 10 mm x 3.3 mm keyseat. High-strength cast-iron construction rated for 940 in-lb torque with EPDM or Neoprene sleeves and 2,875 in-lb with Hytrel sleeves at up to 5,250 RPM.
MODEL 7S32MM
Contact supplier for technical support on: 888-829-6637
$46.31 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore size
32 mm
Bore size (mm)
32 mm
Bore tolerance
+.025 to +.050
Bore tolerance (in)
+0.0005 to +0.0015
Component WR2 (lbs ft2)
0.0418
Component WR²
0.0418
Construction type
Finish bore with keyway
Coupling size
7
Dimension (in) (C)
1 27/32
Dimension (in) (D)
4.625
Dimension (in) (H)
2 13/16
Dimension (in) (S)
3/8
Dimension (in) (T)
11/16
Dimension (in.) (E)
1
Flange diameter
4.625
Horsepower Rating at 100 RPM
50
Keyseat (mm)
10mm x 3.3mm
Keyseat size
10 mm x 3.3 mm
Length through bore
47
Material type
High strength cast iron
Max angular gap misalignment
2.06 (mm) with EPDM/Neoprene Sleeves and 0.51 (mm) with Hytrel Sleeves
Max angular misalignment
1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves
Max compatible bore size
47
Max parallel misalignment
7
Max RPM
5250
Max speed
5250
Min compatible bore size
16
Outside diameter
117
Power rating at 100 RPM
1.1 kW with EPDM or Neoprene sleeve, 3.4 kW with Hytrel sleeve
Screw size
Setscrew
Screw type
Flange, Type S
Set screw distance
10
Setscrew length
10
Setscrew length (mm)
10 mm
Setscrew size, location
M8 x 1.25, one over KS and at 90 degrees
Setscrew torque requirement
18
Setscrew Torque Requirment (ft lbs)
13
SF flange length
20
SF hub diameter
71
SF hub length
17
Torque
940 in-lb with EPDM or Neoprene sleeve, 2,875 in-lb with Hytrel sleeve
Torque rate
940 (in-lbs) with EPDM or Neoprene sleeve; 2,875 (in-lbs) with Hytrel sleeve
Shaft Couplings and Collars The TB Woods 7S32MM Sure-Flex flange coupling is engineered to provide robust power transmission for various industrial applications. This complete unit integrates advanced design elements and high-quality materials to ensure reliable performance in demanding environments.
Key Features
| Design | The 7S32MM coupling features a precision-engineered flange design that allows for easy installation and alignment, minimizing downtime during maintenance. |
|---|---|
| Material | Constructed from durable materials, this coupling provides exceptional resistance to wear and fatigue, ensuring longevity in operation. |
| Performance | Designed to accommodate misalignment, this coupling enhances system reliability while reducing vibration and stress on connected components. |
| Compatibility | The 7S32MM is compatible with a variety of shaft sizes, enabling seamless integration into existing setups without the need for extensive modifications. |
| Maintenance Efficiency | The Sure-Flex design allows for quick and straightforward maintenance, significantly reducing operational costs over time. |
Applications
| Industrial Manufacturing | Ideal for use in conveyor systems, pumps, and motors where smooth and reliable power transmission is critical. |
|---|---|
| Food and Beverage | Suitable for applications requiring stringent sanitary standards, providing a reliable solution without compromising hygiene. |
| Material Handling | Perfect for handling equipment, ensuring consistent performance under varying load conditions. |
Benefits
| Enhanced Reliability | The unique design reduces the risk of failure, ensuring continuous operation and minimizing unscheduled downtime. |
|---|---|
| Cost Efficiency | By extending the lifecycle of both the coupling and connected machinery, this product contributes to lower maintenance and replacement costs. |
| Vibration Dampening | The elastomeric properties of the coupling help to absorb shocks and vibrations, leading to improved system performance and equipment longevity. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read more
| Brand | Gates Rubber |
| Model | 900M22 |
| Brand | NTN Bearing |
| Model | 23024EAW33C3 |
| Brand | Consolidated Bearings |
| Model | 1604-2RSNR |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.