We never sell your data to third parties
SKF LMCG 1/0.4 is a grid and gear coupling grease designed for lubricating flexible couplings in industrial drives. It provides reliable lubrication under high loads and misalignment conditions.
MODEL LMCG 1/0.4
This product has a minimum order quantity of (12 minimum) This is the minimum order quantity available when purchasing this product.
$21.74 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity(12 minimum)
Typically Ships in: 1 day
Returnable:No
AGMA Code
CG-2
Available for Single Point Lubrication
no
Base Oil Type
Mineral
Base Oil Viscosity DIN 51562 at 100 °C
44 mm²/s
Base Oil Viscosity DIN 51562 at 40 °C
761 mm²/s
Colour
Brown
Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C
1b
Corrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl
2 - 2
Density (DIN 51757) at 20 °C (68 ºf)
0.94 g/cm³
DIN 51825 Code
GOG1G-0
Dropping Point (min) ISO 2176
160 °C
EP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N
0.5 mm
EP Performance - 4 Ball - Weld Load (min.) DIN 51350/4
3200 N
Flow pressure, DIN 51805-2
<1400 mBar at -10°C
NLGI Consistency Class
1
Operating Temperature Range
0-120 °C
Pack Height
238 mm
Pack Length
55 mm
Pack Width
55 mm
Packsize
420 ml cartridge
Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm
25
Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm)
310-340
Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C
700 at 220°C
Shelf Life
5 year
Thickener
Polyethylene
Water wash-out test, ISO 11009
<10% at 38 °C
A polyethylene thickened and mineral oil based grease which also uses a lithium complex thickening technology. The grease is formulated to withstand high centrifugal forces and high-torque applications for grid and gear (flexible) couplings even where severe shock loadings, misalignment and vibration occur. Leakage is prevented at high speeds and the grease is stable in consistency. The special additive formulations make the grease suitable for applications subjected to high loads, high torque, wet environments, a wide range of speed regimes and wide range of temperatures.
- Excellent resistance to oil separation
- High acceleration and high operating speeds
- Excellent high-torque lubrication
- High corrosion protection
- Exceeds AGMA Type CG-1 and AGMA Type CG-2 requirements
- High coupling wear protection
- Excellent oxidation stability
- Due to low oil bleeding tendency, suitable for use in centralized lubrication systems
| Brand | McGill Bearing |
| Model | SB 22312 C3 W33 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF