We never sell your data to third parties
TB Woods 5V1506W Sure-Grip QD bushing for W-series sheave mounting with 15.0" outside diameter. Designed for 6-groove 5V narrow-wedge Ultra-V sheaves. Cast-iron construction with black-oxide finish and standard ANSI keyway. Uses two clamp screws for secure taper-bushing interface on industrial V-belt drives.
MODEL 5V1506W
Contact supplier for technical support on: 888-829-6637
$3,552.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Sheaves The TB Woods 5V1506W Companion Sheave is engineered for optimal performance in power transmission applications. This high-quality sheave is designed to work seamlessly with QD (Quick Disconnect) bushings, providing reliable and efficient operation in a variety of industrial settings.
Key Features
| Dimensions | 5V15.0X6W-F, ensuring compatibility with standard V-belt systems |
|---|---|
| Material | Constructed from durable materials for enhanced strength and longevity |
| Design | QD Bushed design allows for quick and easy installation and removal |
| Performance | Engineered for minimal vibration and noise, contributing to smooth operation |
| Compatibility | Works with a variety of TB Woods V-belt drives and other standard components |
Applications
- Widely utilized in industries such as food and beverage, energy, and material handling
- Ideal for use in belt drive systems where reliable power transmission is critical
- Suitable for environments requiring robust and durable components
Benefits
| Efficiency | Designed to optimize power transmission, reducing energy losses |
|---|---|
| Reliability | Built to withstand high loads and harsh conditions, ensuring long-lasting performance |
| Ease of Maintenance | The QD design simplifies service and replacement, minimizing downtime |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read more
| Brand | Gates Rubber |
| Model | 9 X 345 RE |
| Brand | Cortina |
| Model | 03-747WRBC |
| Brand | System Plast |
| Model | VG-687FLEX-1.4-05 |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.