SMC ISE1-T1-55 digital pressure switch monitors non-corrosive, non-flammable gas pressure with digital output and optional analog voltage output. Low and high pressure ranges available with metric or NPTF male thread connections. Rotary trimmers adjust set point.

ISE1 is a basic pressure switch with digital output and optional analog voltage output. The ISE1 monitors the pressure of any non-corrosive, non-flammable gas. Low and high pressure ranges are offered, as well as metric or NPTF male thread connections. Rotary trimmers adjust the switch set point and variable hysteresis if 1 output, or two set point trimmers if 2 output. A red/green LED indicator also lights when the output signal is ON. Electrical connections include a 3 wire grommet cable or 4 wire snap-in connector. ISE1 is CE and RoHS compliant, with an IP40 enclosure rating.

• Basic pressure switch with rotary adjustment of digital outputs, plus 1-5V output
• Positive pressure range: 0 to 100kPa, 0 to 1 MPa
• Output options: 1 or 2 signal outputs (NPN or PNP), with or without analog voltage
• Power supply requirement: 12 to 24 VDC
• Repeatablility: ±1% of F.S.
• Port sizes: 1/8 Rc or 1/8 NPTF male,(incl. M5x0.8 female)