We never sell your data to third parties
Grove Gear Electra-Gear EL-B821-50-D (catalog EL8210033.00) 50:1 ratio right angle aluminum single-reduction worm gear speed reducer with 2.06" center distance. Non-flanged solid output with double extension shaft. 0.625" input diameter, 1" output diameter. Lightweight aluminum housing for OEM and corrosion-resistant applications.
MODEL EL8210033.00
Contact supplier for technical support on: 800-626-2120
$1,262.16 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
B-D
Center Distance
2.1 In.
Center distance (in)
2.06
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
3/8-16
Housing material
Aluminum
HP Range
1/2 to 3/4 HP (< 1)
Input Diameter (in)
0.625
Input HP
0.769
Input HP @ 1750 RPM
0.769
Input RPM
1750
Input Style
Solid Input Shaft
Keyway
3/16 X 1.38
Max OHL (Output Shaft)
1385
Max Thrust Load (Output Shaft)
1144
Model Code
B821
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
1.000
Output HP
0.539
Output Key
1/4 x 1.44
Output RPM
35
Output Shaft
Solid Shaft
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
970
Output Torque Range
500 to 1000 in lbs
Output type
Solid Shaft
Overhung Load
1385
Paint/Coating
Aluminum
Product Line
EL Series - Aluminum Worm Gear Reducers
Product Type
Right Angle
Ratio
50 to 1
Ratio Range
50-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
EL Series - Aluminum Worm Gear Reducers
Series Code
EL
Series Style
EL-B-D
Service Factor
1
Shaft Seal Material
Viton
TAP Depth
0.87
Thrust Rating - output shaft
1144
Regal Beloit Grove Gear&Reg; EL8210033.00
UPC: 662959007105 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® ELECTRA GEAR® Worm Gear Reducer, Right Angle Single Reduction, Series: EL Series, 50:1 Gear Ratio, 0.769 hp Input, 0.539 hp Output, Shaft Input, Shaft Output, 0.625 in Dia x 1.76 in L Input, 1 in Dia x 2.29 in L Output, 35 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 970 in-lb Output, 2.06 in Centre Distance, 0.1875 x 1.38 in Input, 0.25 x 1.44 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Aluminum, 6.88 in H
Features:
- Aluminum housing provides superior resistances to corrosion even in harsh environments
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant - USDA class H1 approved
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 35 rpm
- Centre Distance: 2.06 in
- Input Type: Shaft
- Output Size: 1 in Dia x 2.29 in L
- Input Size: 0.625 in Dia x 1.76 in L
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 970 in-lb Output
- Horsepower: 0.769 hp Input, 0.539 hp Output
- Keyway Size: 0.1875 x 1.38 in Input, 0.25 x 1.44 in Output
- Gear Ratio: 50:1
- Output Type: Shaft
- Mounting Type: Base
- Dimensions: 6.88 in H
- Material: Aluminum
- Type: Right Angle Single Reduction
- Series: EL Series
Packaging:
- Weight: 17.0 lb
Warranty:
Limited
| Brand | NSK Bearings |
| Model | UC218-308D1 |
| Brand | NSK Bearings |
| Model | 1070-2.7/16G |
