We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear Electra-Gear EL-H826-20-H_-16 (catalog EL8260505.16) 20:1 ratio right angle aluminum single-reduction worm gear speed reducer with 2.63" center distance. Non-flanged hollow output with 1" bore. 0.75" input diameter. 800 Series housing.
MODEL EL8260505.16
Contact supplier for technical support on: 800-626-2120
$2,161.23 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
H-H1
Bore Code
16
Center Distance
2.6 In.
Center distance (in)
2.63
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Aluminum
HP Range
2HP (< 3)
Input Diameter (in)
0.75
Input HP
2.965
Input RPM
1750
Input Style
Solid Input Shaft
Keyway
3/16 x 1.63
Model Code
H826
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
1.000
Output Hollow Shaft Diameter (in)
1.000
Output HP
2.549
Output Key
1/4 X 2.50
Output RPM
87
Output Shaft Assembly Code
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
1836
Output Torque Range
1000 to 2500 in lbs
Output type
Hollow bore
Paint/Coating
Aluminum
Product Line
EL Series - Aluminum Worm Gear Reducers
Product Type
Right Angle
Ratio
20 to 1
Ratio Range
20-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
EL Series - Aluminum Worm Gear Reducers
Series Style
EL-H-H1
Service Factor
1
Shaft Seal Material
Viton
Regal Beloit Grove Gear&Reg; EL8260505.16
UPC: 662959023655 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® ELECTRA GEAR® Worm Gear Reducer, Right Angle Single Reduction, Series: EL Series, 20:1 Gear Ratio, 2.965 hp Input, 2.549 hp Output, Shaft Input, Hollow Bore Output, 0.75 in Dia x 2.45 in L Input, 1 in Dia Output, 87 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1836 in-lb Output, 2.63 in Centre Distance, 0.1875 x 1.63 in Input, 1/4 x 2-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Aluminum, 7 in W
Features:
- Aluminum housing provides superior resistances to corrosion even in harsh environments
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant - USDA class H1 approved
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 87 rpm
- Centre Distance: 2.63 in
- Input Type: Shaft
- Output Size: 1 in Dia
- Input Size: 0.75 in Dia x 2.45 in L
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 1836 in-lb Output
- Horsepower: 2.965 hp Input, 2.549 hp Output
- Keyway Size: 0.1875 x 1.63 in Input, 1/4 x 2-1/2 in Output
- Gear Ratio: 20:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Dimensions: 7 in W
- Material: Aluminum
- Type: Right Angle Single Reduction
- Series: EL Series
Packaging:
- Weight: 34.0 lb
Warranty:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read more
| Brand | Bando |
| Model | 887.2-25.3-30-10.5K |
| Brand | GMN Bearings USA |
| Model | HYS6015 CTA P4+ UL |
| Brand | NK North America Inc. |
| Model | K2121.9512003X10 |
| Brand | Techtop |
| Model | GX3-AL-TF-213T-6-B-D-3 |
| Brand | GMN Bearings USA |
| Model | L 55 x 68 x 10 |
| Brand | NK North America Inc. |
| Model | K2126.05123A1X30 |
| Brand | GMN Bearings USA |
| Model | L 80 x 100 x 10 |
| Brand | GMN Bearings USA |
| Model | M 28 x 39 x 10 |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read more