We never sell your data to third parties
Grove Gear Electra-Gear EL-BM842-7.5-L-250 EL8420182.00 7.5:1 ratio right angle aluminum single-reduction worm gear speed reducer with 4.25" center distance. Features a 250TC motorized quill input, 1.625" input diameter, 1.75" left-hand solid output shaft, and lightweight aluminum housing.
MODEL EL8420182.00
Contact supplier for technical support on: 800-626-2120
$4,085.06 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-L
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Aluminum
HP Range
15 HP (< 20)
Input Bore (C Face)
1.625
Input Diameter (in)
1.625
Input Flange
250TC
Input HP
16.27
Input RPM
1750
Input Style
3-Piece Coupled
Model Code
BM842
Motor Frame Size
250TC
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
1.750
Output HP
15.36
Output Key
3/8 x 2.5
Output RPM
233
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
4148
Output Torque Range
2500 to 5000 in lbs
Output type
Shaft
Overhung Load
2930
Paint/Coating
Aluminum
Product Line
EL Series - Aluminum Worm Gear Reducers
Product Type
Right Angle
Ratio
7.5 to 1
Ratio Range
7.5-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
EL Series - Aluminum Worm Gear Reducers
Series Style
EL-BM-L
Service Factor
1
Shaft Seal Material
Viton
Size
250TC
Regal Beloit Grove Gear&Reg; EL8420182.00
UPC: 662959055878 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear ELECTRA GEAR Worm Gear Reducer, Right Angle Single Reduction, Series: EL Series, 7.5:1 Gear Ratio, 16.27 hp Input, 15.36 hp Output, C-Face Coupled Input, Shaft Output, 1-5/8 in Dia Input, 1-7/8 in Dia x 4-1/2 in L Output, 233 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 4148 in-lb Output, 4-1/4 in Centre Distance, 3/8 x 3/16 in Input, 3/8 x 2-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Aluminum
Features:
- Aluminum housing provides superior resistances to corrosion even in harsh environments
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 233 rpm |
| Centre Distance | 4-1/4 in |
| Input Type | C-Face Coupled |
| Output Size | 1-7/8 in Dia x 4-1/2 in L |
| Input Size | 1-5/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 4148 in-lb Output |
| Horsepower | 16.27 hp Input, 15.36 hp Output |
| Keyway Size | 3/8 x 3/16 in Input, 3/8 x 2-1/2 in Output |
| Gear Ratio | 7.5:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Aluminum |
| Type | Right Angle Single Reduction |
| Series | EL Series |
Packaging:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more
| Brand | McGill Bearing |
| Model | SB 22213 C4 W33 |
| Brand | HUCO Products |
| Model | 470.33.2436 |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more