We never sell your data to third parties
Grove Gear IronMan GR-B813-50-D (catalog GR8130033.00) 50:1 ratio single-reduction worm gear speed reducer with 1.33" center distance. Cast iron housing with double-extension solid output shaft (0.625" diameter) and 0.5" input shaft. Right-angle design for general industrial power transmission applications.
MODEL GR8130033.00
Contact supplier for technical support on: 800-626-2120
$685.23 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
B-D
Center Distance
1.3 In.
Center distance (in)
1.33
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/16-18 UNC
Height (in)
10.50
Housing material
Cast iron
HP Range
1/3 HP or Less (< 1/2)
Input Diameter (in)
0.5
Input HP
0.346
Input HP @ 1750 RPM
0.285
Input RPM
2500
Input Style
Solid Input Shaft
Keyway
1/8 X 1/16
Length (in)
10.69
Max OHL (Output Shaft)
700
Max Thrust Load (Output Shaft)
1144
Model Code
B813
Mounting Style
No Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
0.625
Output HP
0.182
Output Key
3/16 X 1.50
Output RPM
35
Output Shaft
Solid Shaft
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
327
Output Torque (lb-in)
292
Output Torque Range
250 to 500 in lbs
Output type
Solid Shaft
Overhung Load
700
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
50 to 1
Ratio Range
50-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-B-D
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
TAP Depth
0.5
Thrust Rating - output shaft
1144
Width (in)
9.06
Regal Beloit Grove Gear&Reg; GR8130033.00
UPC: 690310002377 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 50:1 Gear Ratio, 0.285 hp Input, 0.182 hp Output, Shaft Input, Shaft Output, 0.5 in Dia x 1.76 in L Input, 0.625 in Dia x 2.16 in L Output, 35 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 327 in-lb Output, 1.33 in Centre Distance, 1/8 x 1 in Input, 3/16 x 1-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, No Base Mount, Cast Iron, 4.66 in H
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 35 rpm
- Centre Distance: 1.33 in
- Input Type: Shaft
- Output Size: 0.625 in Dia x 2.16 in L
- Input Size: 0.5 in Dia x 1.76 in L
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 327 in-lb Output
- Horsepower: 0.285 hp Input, 0.182 hp Output
- Keyway Size: 1/8 x 1 in Input, 3/16 x 1-1/2 in Output
- Gear Ratio: 50:1
- Output Type: Shaft
- Mounting Type: No Base
- Dimensions: 4.66 in H
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Length: 10.69 in
- Width: 9.06 in
- Height: 10.5 in
- Weight: 17.0 lb
Warranty:
Limited
| Brand | NTN Bearing |
| Model | NU209EAG1C3 |