We never sell your data to third parties
Grove Gear IronMan GR-BM818-80-L-56 (catalog GR8180047.00) 80:1 single-reduction worm gear speed reducer with 1.75" center distance, 56C flexible coupling input, 0.625" input diameter, and 0.875" left-hand solid output shaft. Cast iron housing with blue paint finish, Viton shaft seals, and base mounting. Rated 0.208 input HP at 1750 RPM, 314 lb-in output torque, 1200 lb overhung load capacity.
MODEL GR8180047.00
Contact supplier for technical support on: 800-626-2120
$899.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-L
Center Distance
1.8 In.
Center distance (in)
1.75
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/16-18 UNC
Housing material
Cast iron
HP Range
1/3 HP or Less (< 1/2)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input Flange
56C
Input HP
0.247
Input HP @ 1750 RPM
0.208
Input Keyway (C Face)
3/16 x 3/32
Input RPM
2500
Input Style
3-Piece Coupled
Max OHL (Output Shaft)
1200
Max Thrust Load (Output Shaft)
1144
Model Code
BM818
Motor Frame Size
56
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
0.875
Output HP
0.124
Output Key
3/16 x 1.38
Output RPM
21
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
356
Output Torque (lb-in)
314
Output Torque Range
250 to 500 in lbs
Output type
Solid Shaft
Overhung Load
1200
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
80 to 1
Ratio Range
80-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BM-L
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
0.63
Thrust Rating - output shaft
1144
Regal Beloit Grove Gear&Reg; GR8180047.00
UPC: 690310007068 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 80:1 Gear Ratio, 0.208 hp Input, 0.124 hp Output, C-Face Coupled Input, Shaft Output, 5/8 in Dia Input, 0.875 in Dia x 2.05 in L Output, 21 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 356 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input, 0.1875 x 1.38 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 21 rpm |
| Centre Distance | 1-3/4 in |
| Input Type | C-Face Coupled |
| Output Size | 0.875 in Dia x 2.05 in L |
| Input Size | 5/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 356 in-lb Output |
| Horsepower | 0.208 hp Input, 0.124 hp Output |
| Keyway Size | 3/16 x 3/32 in Input, 0.1875 x 1.38 in Output |
| Gear Ratio | 80:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
#2187074
Brand
U.S. Seal Mfg.
Model
STG9VCA58
#2281330
Brand
Browning
Model
1057595
#5957438
Brand
Bestorq
Model
10/B330
#23375
Brand
Baldor
Model
CDPWD3603