We never sell your data to third parties
Grove Gear IronMan GR-HMQ818-15-H1-140-14 (catalog GR8180552.14) 15:1 single reduction right angle worm gear speed reducer with 1.75" center distance. Cast iron housing, 140TC C-face quill flange input, universal hand hollow output with 0.875" bore. Factory-filled PAG synthetic oil, Viton double-lip seals, tapered roller bearings. Blue painted finish. For industrial power transmission applications.
MODEL GR8180552.14
Contact supplier for technical support on: 800-626-2120
$1,214.77 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
14
Center Distance
1.8 In.
Center distance (in)
1.75
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
1 to 1-1/2 HP (< 2)HP
Input Bore (C Face)
0.875
Input Diameter (in)
0.875
Input Flange
143-5TC
Input HP
1.224
Input HP @ 1750 RPM
1.224
Input Keyway (C Face)
3/16 X 3/32
Input RPM
1750
Input Style
Quill
Max OHL (Output Shaft)
1200
Max Thrust Load (Output Shaft)
1144
Model Code
HMQ818
Motor Frame Size
140
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
0.875
Output Hollow Shaft Diameter (in)
0.875
Output HP
1.058
Output Key
3/16 X 1.50
Output RPM
116
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
571
Output Torque (lb-in)
571
Output Torque Range
500 to 1000 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
1200
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
15 to 1
Ratio Range
15-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
Thrust Rating - output shaft
1144
Regal Beloit Grove Gear&Reg; GR8180552.14
UPC: 690310009284 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 15:1 Gear Ratio, 1.224 hp Input, 1.058 hp Output, C-Face Quill Input, Hollow Bore Output, 7/8 in Dia Input, 7/8 in Dia Output, 116 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 571 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input, 3/16 x 1-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 5-1/2 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 116 rpm
- Centre Distance: 1-3/4 in
- Input Type: C-Face Quill
- Output Size: 7/8 in Dia
- Input Size: 7/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 571 in-lb Output
- Horsepower: 1.224 hp Input, 1.058 hp Output
- Keyway Size: 3/16 x 3/32 in Input, 3/16 x 1-1/2 in Output
- Gear Ratio: 15:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Dimensions: 5-1/2 in W
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 26.0 lb
Warranty:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more
#865771
Brand
Contrinex Sensors
Model
S12-4FVG-020-NNLN-12MG
#1330312
Brand
Electra/Grove Gear
Model
GR8240552.23
#96937634
Brand
NK North America Inc.
Model
K1021.A4650X67
#96937577
Brand
NK North America Inc.
Model
K1021.A3700X67
#96937442
Brand
NK North America Inc.
Model
K1021.A1490X36
#106864
Brand
Dixon Sanitary Fittings
Model
B2P-G400
#2084323
Brand
Toshiba
Model
J2258NLF3I-C
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more