We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear IronMan GR-HM824-15-H1-56-23 (catalog GR8240516.23) 15:1 ratio single-reduction worm gear speed reducer with 2.38" center distance. Cast iron housing, 56C motorized flexible coupling input, hollow universal output with 1.438" bore. Right angle configuration.
MODEL GR8240516.23
Contact supplier for technical support on: 800-626-2120
$1,653.06 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HM-H1
Bore Code
23
Center Distance
2.4 In.
Center distance (in)
2.38
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
2 HP to (< 3)HP
Input Bore (C Face)
0.625
Input Diameter (in)
0.75
Input Flange
56C
Input HP
3.268
Input HP @ 1750 RPM
2.765
Input Keyway (C Face)
3/16 x 3/32
Input RPM
2500
Input Style
3-Piece Coupled
Keyway
3/16 X 1.63
Max OHL (Output Shaft)
1770
Max Thrust Load (Output Shaft)
2091
Model Code
HM824
Motor Frame Size
56
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
1.438
Output Hollow Shaft Diameter (in)
1.438
Output HP
2.439
Output Key
3/8 X 3.00
Output RPM
116.7
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
1318
Output Torque (lb-in)
1102
Output Torque Range
1000 to 2500 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
1770
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
15 to 1
Ratio Range
15-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HM-H1
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
56C
Thrust Rating - output shaft
2091
Regal Beloit Grove Gear&Reg; GR8240516.23
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 15:1 Gear Ratio, 2.765 hp Input, 2.439 hp Output, C-Face Coupled Input, Hollow Bore Output, 5/8 in Dia Input, 1.438 in Dia Output, 116.7 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1318 in-lb Output, 2.38 in Centre Distance, 3/16 x 3/32 in Input, 3/8 x 3 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 6 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 116.7 rpm
- Centre Distance: 2.38 in
- Input Type: C-Face Coupled
- Output Size: 1.438 in Dia
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 1318 in-lb Output
- Horsepower: 2.765 hp Input, 2.439 hp Output
- Keyway Size: 3/16 x 3/32 in Input, 3/8 x 3 in Output
- Gear Ratio: 15:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Dimensions: 6 in W
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 49.0 lb
Warranty:
Limited
SKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more
| Brand | Bando |
| Model | 887.2-25.3-30-10.5 |
| Brand | Electra/Grove Gear |
| Model | EL8420183.00 |
| Brand | Electra/Grove Gear |
| Model | GR8600258.00 |
SKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more