We never sell your data to third parties
Grove Gear GR-HMQ824-15-H1-140-20 GR8240564.20 15:1 ratio single reduction worm gear speed reducer with 2.38" center distance. Cast iron housing with 140TC quill flange input, 0.875" input diameter, and 1-1/4" hollow output bore. Universal hand hollow output. Right angle configuration.
MODEL GR8240564.20
Contact supplier for technical support on: 800-626-2120
$1,705.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
20
Center Distance
2.4 In.
Center distance (in)
2.38
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
2 HP to (< 3)HP
Input Bore (C Face)
0.875
Input Diameter (in)
0.875
Input Flange
143-5TC
Input HP
0.369
Input HP @ 1750 RPM
2.765
Input RPM
100
Input Style
Quill
Keyway
3/16 X 3/32
Max OHL (Output Shaft)
1770
Max Thrust Load (Output Shaft)
2091
Model Code
HMQ824
Motor Frame Size
140
Motor HP Rating
2
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
2
Output
Hollow
Output Diameter (in)
1.25
Output Hollow Shaft Diameter (in)
1.250
Output HP
2.439
Output Key
1/4 X 2.50
Output RPM
116.7
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
1318
Output Torque (lb-in)
2056
Output Torque Range
1000 to 2500 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
1770
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
15 to 1
Ratio Range
15-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
Thrust Rating - output shaft
2091
Regal Beloit Grove Gear&Reg; GR8240564.20
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 15:1 Gear Ratio, 2.765 hp Input, 2.439 hp Output, 2 hp Motor, C-Face Quill Input, Hollow Bore Output, 7/8 in Dia Input, 1-1/4 in Dia Output, 116.7 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1318 in-lb Output, 2.38 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 2-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 6 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 116.7 rpm |
| Centre Distance | 2.38 in |
| Input Type | C-Face Quill |
| Output Size | 1-1/4 in Dia |
| Input Size | 7/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 1318 in-lb Output |
| Horsepower | 2.765 hp Input, 2.439 hp Output, 2 hp Motor |
| Keyway Size | 3/16 x 3/32 in Input, 1/4 x 2-1/2 in Output |
| Gear Ratio | 15:1 |
| Output Type | Hollow Bore |
| Mounting Type | Shaft |
| Dimensions | 6 in W |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
#1332617
Brand
Electra/Grove Gear
Model
GR8300590.24
#1330395
Brand
Electra/Grove Gear
Model
GR8240567.20