We never sell your data to third parties
Grove Gear IronMan GR-B830-15-L (catalog GR8300004.00) 15:1 ratio single-reduction worm gear speed reducer with 3.00" center distance, left-hand solid output shaft, 0.875" input diameter, and 1.250" output diameter. Cast iron housing with blue paint finish, base mounting, and Viton shaft seals. Rated for 4.843 input HP at 1750 RPM, delivering 4.311 output HP at 116 RPM with 3949 lb-in output torque.
MODEL GR8300004.00
Contact supplier for technical support on: 800-626-2120
$1,513.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
B-L
Center Distance
3 In.
Center distance (in)
3.00
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16 - 14 UNC
Housing material
Cast iron
HP Range
3HP (< 5)
Input Diameter (in)
0.875
Input HP
0.663
Input HP @ 1750 RPM
4.843
Input RPM
100
Input Style
Solid Input Shaft
Keyway
3/16 X 1.63
Max OHL (Output Shaft)
2170
Max Thrust Load (Output Shaft)
2549
Model Code
B830
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
1.250
Output HP
4.311
Output Key
1/4 X 1.75
Output RPM
116
Output Shaft
Solid Shaft
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
2329
Output Torque (lb-in)
3949
Output Torque Range
1000 to 2500 in lbs
Output type
Solid Shaft
Overhung Load
2170
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
15 to 1
Ratio Range
15-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-B-L
Service Factor
1
Shaft Seal Material
Viton
TAP Depth
0.88
Thrust Rating - output shaft
2549
Regal Beloit Grove Gear&Reg; GR8300004.00
UPC: 690310018279 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 15:1 Gear Ratio, 4.843 hp Input, 4.311 hp Output, Shaft Input, Shaft Output, 0.875 in Dia x 2.38 in L Input, 1.25 in Dia x 3.6 in L Output, 116 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2329 in-lb Output, 3 in Centre Distance, 0.1875 x 1.63 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron, 8.88 in H
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 116 rpm
- Centre Distance: 3 in
- Input Type: Shaft
- Output Size: 1.25 in Dia x 3.6 in L
- Input Size: 0.875 in Dia x 2.38 in L
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 2329 in-lb Output
- Horsepower: 4.843 hp Input, 4.311 hp Output
- Keyway Size: 0.1875 x 1.63 in Input, 1/4 x 1-3/4 in Output
- Gear Ratio: 15:1
- Output Type: Shaft
- Mounting Type: Base
- Dimensions: 8.88 in H
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 64.0 lb
Warranty:
Limited
