We never sell your data to third parties
Grove Gear IronMan GR-BM830-60-L-56 (catalog GR8300046.00) 60:1 ratio single-reduction worm gear speed reducer with 3.00" center distance, 56C motorized flexible coupling input, 0.875" input shaft diameter, 1.250" output shaft diameter, and left-hand solid output. Cast iron housing with blue paint finish, Viton shaft seals, and tapered roller bearings. Rated 1.637 input HP at 1750 RPM, 2413 lb-in output torque, 2170 lb overhung load capacity.
MODEL GR8300046.00
Contact supplier for technical support on: 800-626-2120
$1,750.27 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-L
Center Distance
3 In.
Center distance (in)
3.00
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16 - 14 UNC
Height (in)
15.00
Housing material
Cast iron
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.625
Input Diameter (in)
0.875
Input Flange
56C
Input HP
1.637
Input HP @ 1750 RPM
1.637
Input RPM
1750
Input Style
3-Piece Coupled
Keyway
3/16 X 3/32
Length (in)
19.38
Max OHL (Output Shaft)
2170
Max Thrust Load (Output Shaft)
2574
Model Code
BM830
Motor Frame Size
56C
Mounting Style
No Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
1.250
Output HP
1.117
Output Key
1/4 X 1.75
Output RPM
29
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
2413
Output Torque (lb-in)
2413
Output Torque Range
1000 to 2500 in lbs
Output type
Solid Shaft
Overhung Load
2170
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
60 to 1
Ratio Range
60-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BM-L
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
0.88
Thrust Rating - output shaft
2574
Width (in)
15.13
Regal Beloit Grove Gear&Reg; GR8300046.00
UPC: 690310018651 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 60:1 Gear Ratio, 1.637 hp Input, 1.117 hp Output, C-Face Coupled Input, Shaft Output, 5/8 in Dia Input, 1.25 in Dia x 3.6 in L Output, 29 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2413 in-lb Output, 3 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, No Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 29 rpm |
| Centre Distance | 3 in |
| Input Type | C-Face Coupled |
| Output Size | 1.25 in Dia x 3.6 in L |
| Input Size | 5/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 2413 in-lb Output |
| Horsepower | 1.637 hp Input, 1.117 hp Output |
| Keyway Size | 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output |
| Gear Ratio | 60:1 |
| Output Type | Shaft |
| Mounting Type | No Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
| Length | 19.38 in |
|---|---|
| Width | 15.13 in |
| Height | 15.0 in |
Warranty:
Limited
SKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more
#142157
Brand
Dodge
Model
30Q60L56
#1331728
Brand
Electra/Grove Gear
Model
GR8300190.00
#149495
Brand
Dodge
Model
30Q60L56WP
#143416
Brand
Dodge
Model
30A60L56
#148988
Brand
Dodge
Model
30A60L56WP
#5785597
Brand
Dodge
Model
30Q60L56SP
#6001734
Brand
Winsmith
Model
U3060SL56
| Brand | Martin Sprocket |
| Model | 2VP60 1 5/8 |
SKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more