We never sell your data to third parties
Grove Gear GR-BM830-30-R-140 GR8300091.00 30:1 ratio right angle cast iron single-reduction worm gear speed reducer with 3.00" center distance. Features 140TC flexible coupling input, 0.875" input diameter, 1.250" right-hand solid output shaft. Part of the 800 Series with motorized non-flanged solid output configuration.
MODEL GR8300091.00
Contact supplier for technical support on: 800-626-2120
$1,750.27 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-R
Center Distance
3 In.
Center distance (in)
3.00
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16 - 14 UNC
Height (in)
15.00
Housing material
Cast iron
HP Range
2HP (< 3)
Input Bore (C Face)
0.875
Input Diameter (in)
0.875
Input Flange
143-5TC
Input HP
2.335
Input HP @ 1750 RPM
2.879
Input RPM
1170
Input Style
3-Piece Coupled
Keyway
3/16 X 3/32
Length (in)
19.38
Max OHL (Output Shaft)
2170
Max Thrust Load (Output Shaft)
2574
Model Code
BM830
Motor Frame Size
140TC
Motor HP Rating
2
Mounting Style
Base
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
2
Output
Right
Output Diameter (in)
1.250
Output HP
2.332
Output Key
1/4 X 1.75
Output RPM
58
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
2519
Output Torque (lb-in)
2982
Output Torque Range
2500 to 5000 in lbs
Output type
Solid Shaft
Overhung Load
2170
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BM-R
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
TAP Depth
0.88
Thrust Rating - output shaft
2574
Width (in)
15.13
Regal Beloit Grove Gear&Reg; GR8300091.00
UPC: 690310018965 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 30:1 Gear Ratio, 2.879 hp Input, 2.332 hp Output, 2 hp Motor, C-Face Coupled Input, Shaft Output, 7/8 in Dia Input, 1.25 in Dia x 3.6 in L Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2519 in-lb Output, 3 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 58 rpm
- Centre Distance: 3 in
- Input Type: C-Face Coupled
- Output Size: 1.25 in Dia x 3.6 in L
- Input Size: 7/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 2519 in-lb Output
- Horsepower: 2.879 hp Input, 2.332 hp Output, 2 hp Motor
- Keyway Size: 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output
- Gear Ratio: 30:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Length: 19.38 in
- Width: 15.13 in
- Height: 15.0 in
- Weight: 69.0 lb
Warranty:
Limited
| Brand | Triflow |
| Model | TF2306200 |
| Brand | NK North America Inc. |
| Model | K0364.31CQL36 |
| Brand | Woodex Bearing |
| Model | WX1509-18B |