We never sell your data to third parties
Grove Gear IronMan GR-BMQ830-30-L-140 (catalog GR8300223.00) 30:1 single-reduction right angle worm gear speed reducer with 3.00" center distance, cast iron housing, 140TC quill flange input, and solid left-hand output shaft with 1.250" diameter. Input shaft diameter is 0.875". Factory-filled with synthetic oil and 100% run-leak tested.
MODEL GR8300223.00
Contact supplier for technical support on: 800-626-2120
$1,437.01 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-L
Center Distance
3 In.
Center distance (in)
3.00
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16 - 14 UNC
Height (in)
15.00
Housing material
Cast iron
HP Range
2HP (< 3)
Input Bore (C Face)
0.875
Input Diameter (in)
0.875
Input Flange
143-5TC
Input HP
3.389
Input HP @ 1750 RPM
2.879
Input RPM
2500
Input Style
Quill
Keyway
3/16 X 3/32
Length (in)
19.38
Max OHL (Output Shaft)
2170
Max Thrust Load (Output Shaft)
2574
Model Code
BMQ830
Motor Frame Size
140TC
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
1.250
Output HP
2.332
Output Key
1/4 X 1.75
Output RPM
58
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
2519
Output Torque (lb-in)
2108
Output Torque Range
2500 to 5000 in lbs
Output type
Solid Shaft
Overhung Load
2170
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BMQ-L
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
TAP Depth
0.88
Thrust Rating - output shaft
2574
Width (in)
15.11
Regal Beloit Grove Gear&Reg; GR8300223.00
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 30:1 Gear Ratio, 2.879 hp Input, 2.332 hp Output, C-Face Quill Input, Shaft Output, 7/8 in Dia Input, 1.25 in Dia x 3.6 in L Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2519 in-lb Output, 3 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 58 rpm |
| Centre Distance | 3 in |
| Input Type | C-Face Quill |
| Output Size | 1.25 in Dia x 3.6 in L |
| Input Size | 7/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 2519 in-lb Output |
| Horsepower | 2.879 hp Input, 2.332 hp Output |
| Keyway Size | 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output |
| Gear Ratio | 30:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
SKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read more
#148981
Brand
Dodge
Model
30A30L14
#2299393
Brand
Morse
Model
XH1157
#142146
Brand
Dodge
Model
30Q30L14
#44442
Brand
Boston Gear
Model
F730-30-B7-G
#2420775
Brand
Winsmith
Model
E30MDNM42000EK
#1346920
Brand
Electra/Grove Gear
Model
NH8300223.00
#143473
Brand
Dodge
Model
30A30L14WP
#149493
Brand
Dodge
Model
30Q30L14WP
| Brand | Jason Industrial |
| Model | 7/B240 |
SKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read more