We never sell your data to third parties
Grove Gear IronMan GR-BMQ830-5-L-210 (catalog GR8300289.00) 5:1 ratio single-reduction worm gear speed reducer with 3.00" center distance, 210TC quill flange input, 1.375" input diameter, and 1.250" solid output shaft with left-hand rotation. Cast iron housing with blue paint, Viton seals, and base mounting. Delivers 8.573 output HP at 350 RPM with 1544 lb-in output torque and 1.0 service factor.
MODEL GR8300289.00
Contact supplier for technical support on: 800-626-2120
$1,806.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-L
Center Distance
3 In.
Center distance (in)
3.00
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16-14 UNC
Housing material
Cast iron
HP Range
7-1/2 (< 10)
Input Bore (C Face)
1.375
Input Diameter (in)
1.375
Input Flange
213-5TC
Input HP
7.434
Input HP @ 1750 RPM
9.093
Input Keyway (C Face)
5/16 x 5/32
Input RPM
1170
Input Style
Quill
Keyway
5/16 X 5/32
Max OHL (Output Shaft)
2170
Max Thrust Load (Output Shaft)
1729
Model Code
BMQ830
Motor Frame Size
210
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
1.250
Output HP
8.573
Output Key
1/4 X 1.75
Output RPM
350
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
1544
Output Torque (lb-in)
1876
Output Torque Range
1000 to 2500 in lbs
Output type
Solid Shaft
Overhung Load
2170
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
5 to 1
Ratio Range
5-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BMQ-L
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
210TC
TAP Depth
0.88
Thrust Rating - output shaft
1729
Regal Beloit Grove Gear&Reg; GR8300289.00
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 5:1 Gear Ratio, 9.093 hp Input, 8.573 hp Output, C-Face Quill Input, Shaft Output, 1-3/8 in Dia Input, 1.25 in Dia x 3.6 in L Output, 350 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1544 in-lb Output, 3 in Centre Distance, 5/16 x 5/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 350 rpm |
| Centre Distance | 3 in |
| Input Type | C-Face Quill |
| Output Size | 1.25 in Dia x 3.6 in L |
| Input Size | 1-3/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 1544 in-lb Output |
| Horsepower | 9.093 hp Input, 8.573 hp Output |
| Keyway Size | 5/16 x 5/32 in Input, 1/4 x 1-3/4 in Output |
| Gear Ratio | 5:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
#1330951
Brand
Electra/Grove Gear
Model
GR8260509.23