Grove Gear IronMan GR8320558.20 GR-H832-7.5-H_-20 7.5:1 single-reduction worm gear speed reducer with 3.2" center distance. Cast iron housing with blue paint, solid input shaft, hollow output. Rated 8.863 HP input at 1750 RPM, 2232 lb-in output torque.

Regal Beloit Grove Gear&Reg; GR8320558.20

UPC: 690310025055 | UNSPSC: 26111537 | GTIN:

Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives

Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 7.5:1 Gear Ratio, 8.863 hp Input, 8.264 hp Output, Shaft Input, Hollow Bore Output, 0.875 in Dia x 2.38 in L Input, 1-1/4 in Dia Output, 233.3 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2232 in-lb Output, 3-1/4 in Centre Distance, 0.1875 x 1.63 in Input, 1/4 x 2-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 7.88 in W

Features:

• One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
• Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
• Large oil capacity provides positive splash lubrication and superior cooling capability
• FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
• The unique quill seal guard protects the input seal from damage during motor installation
• Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
• Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
• Tapered roller bearings on output shaft for high overhung and thrust load capacities
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
• Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
• Mounting dimensions are interchangeable with most industry standard reducers

Specs:

• Input Maximum Speed: 1750 rpm
• Output Maximum Speed: 233.3 rpm
• Centre Distance: 3-1/4 in
• Input Type: Shaft
• Output Size: 1-1/4 in Dia
• Input Size: 0.875 in Dia x 2.38 in L
• Lubrication Type: PAG Synthetic Oil
• Torque Rating: 2232 in-lb Output
• Horsepower: 8.863 hp Input, 8.264 hp Output
• Keyway Size: 0.1875 x 1.63 in Input, 1/4 x 2-1/2 in Output
• Gear Ratio: 7.5:1
• Output Type: Hollow Bore
• Mounting Type: Shaft
• Dimensions: 7.88 in W
• Material: Cast Iron
• Type: Right Angle Single Reduction
• Series: GR Series

Packaging:

• Weight: 73.0 lb

Warranty:

Limited