We never sell your data to third parties
Grove Gear IronMan GR-B842-10-R GR8420015.00 10:1 ratio single reduction right angle worm gear speed reducer with 4.25" center distance. Cast iron housing with non-flanged solid right-hand output, 1.25" input diameter, 1.875" output diameter. Blue painted finish, Viton shaft seals, and base mounting. Part of the 800 Series IronMan line.
MODEL GR8420015.00
Contact supplier for technical support on: 800-626-2120
$2,491.03 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
B-R
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/8 - 11 UNC
Height (in)
17.50
Housing material
Cast iron
HP Range
10 HP (< 15)
Input Diameter (in)
1.25
Input HP
12.31
Input HP @ 1750 RPM
14.93
Input RPM
1170
Input Style
Solid Input Shaft
Keyway
1/4 X 2.50
Length (in)
40.00
Max OHL (Output Shaft)
3010
Max Thrust Load (Output Shaft)
1788
Model Code
B842
Mounting Style
Base
No. of Gear Reductions
Single
Output
Right
Output Diameter (in)
1.875
Output HP
14
Output Key
1/2 X 3.06
Output RPM
175
Output Shaft
Solid Shaft
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
5042
Output Torque (lb-in)
6180
Output Torque Range
5000 to 10000 in lbs
Output type
Solid Shaft
Overhung Load
3010
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
10 to 1
Ratio Range
10-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-B-R
Service Factor
1
Shaft Seal Material
Viton
TAP Depth
1
Thrust Rating - output shaft
1788
Width (in)
37.00
Regal Beloit Grove Gear&Reg; GR8420015.00
UPC: 690310026168 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 10:1 Gear Ratio, 14.93 hp Input, 14 hp Output, Shaft Input, Shaft Output, 1.25 in Dia x 8.12 in L Input, 1-7/8 in Dia x 4-1/2 in L Output, 175 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 5042 in-lb Output, 4-1/4 in Centre Distance, 1/4 x 2-1/2 in Input, 0.5 x 3.06 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron, 11.38 in H
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 175 rpm
- Centre Distance: 4-1/4 in
- Input Type: Shaft
- Output Size: 1-7/8 in Dia x 4-1/2 in L
- Input Size: 1.25 in Dia x 8.12 in L
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 5042 in-lb Output
- Horsepower: 14.93 hp Input, 14 hp Output
- Keyway Size: 1/4 x 2-1/2 in Input, 0.5 x 3.06 in Output
- Gear Ratio: 10:1
- Output Type: Shaft
- Mounting Type: Base
- Dimensions: 11.38 in H
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 136.0 lb
Warranty:
Limited
| Brand | HubCity |
| Model | 0220-07570 |