We never sell your data to third parties
Grove Gear GR-BM842-60-L-56 GR8420046.00 60:1 ratio, 4.25" center distance, right angle cast iron single-reduction worm gear speed reducer with 1.25" input diameter, 1.875" output diameter, 56C motorized non-flanged solid input, and left hand solid output.
MODEL GR8420046.00
Contact supplier for technical support on: 800-626-2120
$3,162.77 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-L
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/8-11 UNC
Height (in)
17.50
Housing material
Cast iron
HP Range
3HP (< 5)
Input Bore (C Face)
0.625
Input Diameter (in)
1.25
Input Flange
56C
Input HP
3.116
Input HP @ 1750 RPM
3.681
Input RPM
1170
Input Style
3-Piece Coupled
Keyway
3/16 X 3/32
Length (in)
40.00
Max OHL (Output Shaft)
3730
Max Thrust Load (Output Shaft)
2533
Model Code
BM842
Motor Frame Size
56
Motor HP Rating
3
Mounting Style
Base
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
3
Output
Left
Output Diameter (in)
1.875
Output HP
2.772
Output Key
1/2 X 3.06
Output RPM
29
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
5989
Output Torque (lb-in)
7386
Output Torque Range
5000 to 10000 in lbs
Output type
Solid Shaft
Overhung Load
3730
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
60 to 1
Ratio Range
60-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BM-L
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
1
Thrust Rating - output shaft
2533
Width (in)
37.00
Regal Beloit Grove Gear&Reg; GR8420046.00
UPC: 690310026380 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 60:1 Gear Ratio, 3.681 hp Input, 2.772 hp Output, 3 hp Motor, C-Face Coupled Input, Shaft Output, 5/8 in Dia Input, 1-7/8 in Dia x 4-1/2 in L Output, 29 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 5989 in-lb Output, 4-1/4 in Centre Distance, 3/16 x 3/32 in Input, 0.5 x 3.06 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 29 rpm
- Centre Distance: 4-1/4 in
- Input Type: C-Face Coupled
- Output Size: 1-7/8 in Dia x 4-1/2 in L
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 5989 in-lb Output
- Horsepower: 3.681 hp Input, 2.772 hp Output, 3 hp Motor
- Keyway Size: 3/16 x 3/32 in Input, 0.5 x 3.06 in Output
- Gear Ratio: 60:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Length: 40.0 in
- Width: 37.0 in
- Height: 17.5 in
- Weight: 154.0 lb
Warranty:
Limited
#5010130
Brand
Dodge
Model
40A60L56
| Brand | Boston Gear |
| Model | WA730-3600-G |
| Brand | Browning |
| Model | 6GWF F3 21 A0182 |
| Brand | Martin Sprocket |
| Model | P5220M230-M |