We never sell your data to third parties
Grove Gear GR-BM842-40-D-180 GR8420140.00 40:1 ratio single-reduction worm gear speed reducer with 4.25" center distance, 180TC flexible coupling input, and double-extension solid output shaft. Cast iron IronMan series housing with blue paint, Viton seals, and base mounting. Delivers 6156 lb-in output torque at 43 RPM with 5.262 HP input at 1750 RPM. Right-angle worm gearing for industrial power transmission.
MODEL GR8420140.00
Contact supplier for technical support on: 800-626-2120
$3,283.32 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
BM-D
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/8 - 11 UNC
Housing material
Cast iron
HP Range
5HP (< 7-1/2)
Input Bore (C Face)
1.125
Input Diameter (in)
1.25
Input Flange
182-4TC
Input HP
5.262
Input HP @ 1750 RPM
5.262
Input Keyway (C Face)
1/4 x 1/8
Input RPM
1750
Input Style
3-Piece Coupled
Keyway
1/4 X 2.50
Max OHL (Output Shaft)
3715
Max Thrust Load (Output Shaft)
2533
Model Code
BM842
Motor Frame Size
180TC
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
1.875
Output HP
4.274
Output Key
1/2 X 3.06
Output RPM
43
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
6156
Output Torque (lb-in)
6156
Output Torque Range
5000 to 10000 in lbs
Output type
Solid Shaft
Overhung Load
3715
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
40 to 1
Ratio Range
40-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BM-D
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
TAP Depth
1
Thrust Rating - output shaft
2533
Regal Beloit Grove Gear&Reg; GR8420140.00
UPC: 690310026786 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 40:1 Gear Ratio, 5.262 hp Input, 4.274 hp Output, C-Face Coupled Input, Shaft Output, 1-1/8 in Dia Input, 1-7/8 in Dia x 4-1/2 in L Output, 43 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 6156 in-lb Output, 4-1/4 in Centre Distance, 1/4 x 1/8 in Input, 0.5 x 3.06 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 43 rpm |
| Centre Distance | 4-1/4 in |
| Input Type | C-Face Coupled |
| Output Size | 1-7/8 in Dia x 4-1/2 in L |
| Input Size | 1-1/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 6156 in-lb Output |
| Horsepower | 5.262 hp Input, 4.274 hp Output |
| Keyway Size | 1/4 x 1/8 in Input, 0.5 x 3.06 in Output |
| Gear Ratio | 40:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more
#143695
Brand
Dodge
Model
40A40LR18
| Brand | JW Winco |
| Model | 612-6-M12X1.5-AK-NI |
| Brand | NTN Bearing |
| Model | 6208LLUA1C3 |
| Brand | INA Bearing |
| Model | WZFS1/4L30 |
| Brand | Jason Industrial |
| Model | BX38 |
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more