We never sell your data to third parties
Grove Gear GR-BMQ842-25-D-140 GR8420282.00 25:1 ratio, 4.25" center distance, right angle cast iron single-reduction worm gear speed reducer with 0.875" input diameter, 1.875" output diameter, 140TC quill flange input, and solid double-extension output shaft. IronMan series with one-piece CNC-machined housing, factory-filled PAG synthetic oil, and Viton double-lip seals.
MODEL GR8420282.00
Contact supplier for technical support on: 800-626-2120
$3,283.32 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-D
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/8-11 UNC
Housing material
Cast iron
HP Range
7-1/2 (< 10)
Input Bore (C Face)
0.875
Input Diameter (in)
0.875
Input Flange
143-5TC
Input HP
6.551
Input HP @ 1750 RPM
7.94
Input Keyway (C Face)
3/16 x 3/32
Input RPM
1170
Input Style
Quill
Max OHL (Output Shaft)
3445
Max Thrust Load (Output Shaft)
2533
Model Code
BMQ842
Motor Frame Size
140
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
1.875
Output HP
6.946
Output Key
1/2 x 3.06
Output RPM
70
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
6254
Output Torque (lb-in)
7619
Output Torque Range
5000 to 10000 in lbs
Output type
Solid Shaft
Overhung Load
3445
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
25 to 1
Ratio Range
25-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BMQ-D
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
TAP Depth
1
Thrust Rating - output shaft
2533
Regal Beloit Grove Gear&Reg; GR8420282.00
UPC: 690310027349 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 25:1 Gear Ratio, 7.94 hp Input, 6.946 hp Output, C-Face Quill Input, Shaft Output, 7/8 in Dia Input, 1-7/8 in Dia x 4-1/2 in L Output, 70 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 6254 in-lb Output, 4-1/4 in Centre Distance, 3/16 x 3/32 in Input, 0.5 x 3.06 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 70 rpm |
| Centre Distance | 4-1/4 in |
| Input Type | C-Face Quill |
| Output Size | 1-7/8 in Dia x 4-1/2 in L |
| Input Size | 7/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 6254 in-lb Output |
| Horsepower | 7.94 hp Input, 6.946 hp Output |
| Keyway Size | 3/16 x 3/32 in Input, 0.5 x 3.06 in Output |
| Gear Ratio | 25:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GR Series |
Packaging:
Limited
#142231
Brand
Dodge
Model
35Q25LR14
| Brand | SKF Bearing |
| Model | LM 11749/710/Q |
| Brand | VORTEX |
| Model | VOR XH300-60-140TC-1.437 |
| Brand | Bestorq |
| Model | BX27 |
