We never sell your data to third parties
Grove Gear GR-BMQ842-5-R-250 GR8420373.00 5:1 ratio, 4.25" center distance, right angle cast iron single-reduction worm gear speed reducer. Motorized quill input with 250TC flange, 1.625" input diameter, 1.875" solid output shaft, right hand. IronMan series with blue paint, Viton seals, and base mounting.
MODEL GR8420373.00
Contact supplier for technical support on: 800-626-2120
$3,162.77 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-R
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/8-11 UNC
Housing material
Cast iron
HP Range
15 HP (< 20)
Input Bore (C Face)
1.625
Input Diameter (in)
1.625
Input Flange
254-6TC
Input HP
15.18
Input HP @ 1750 RPM
18.08
Input Keyway (C Face)
3/8 x 3/16
Input RPM
1170
Input Style
Quill
Max OHL (Output Shaft)
2800
Max Thrust Load (Output Shaft)
1445
Model Code
BMQ842
Motor Frame Size
250
Mounting Style
Base
No. of Gear Reductions
Single
Output
Right
Output Diameter (in)
1.875
Output HP
17.25
Output Key
1/2 x 3.06
Output RPM
350
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
3209
Output Torque (lb-in)
4016
Output Torque Range
2500 to 5000 in lbs
Output type
Solid Shaft
Overhung Load
2800
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
5 to 1
Ratio Range
5-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BMQ-R
Service Factor
1
Shaft Seal Material
Viton
Size
250TC
TAP Depth
1
Thrust Rating - output shaft
1445
Regal Beloit Grove Gear&Reg; GR8420373.00
UPC: 690310027943 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 5:1 Gear Ratio, 18.08 hp Input, 17.25 hp Output, C-Face Quill Input, Shaft Output, 1-5/8 in Dia Input, 1-7/8 in Dia x 4-1/2 in L Output, 350 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 3209 in-lb Output, 4-1/4 in Centre Distance, 3/8 x 3/16 in Input, 0.5 x 3.06 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 350 rpm
- Centre Distance: 4-1/4 in
- Input Type: C-Face Quill
- Output Size: 1-7/8 in Dia x 4-1/2 in L
- Input Size: 1-5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 3209 in-lb Output
- Horsepower: 18.08 hp Input, 17.25 hp Output
- Keyway Size: 3/8 x 3/16 in Input, 0.5 x 3.06 in Output
- Gear Ratio: 5:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 146.0 lb
Warranty:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more
#142319
Brand
Dodge
Model
40Q05R25
| Brand | Allen Bradley |
| Model | 800H-QRA24R |
| Brand | Electra/Grove Gear |
| Model | GR8420093.00 |
| Brand | Consolidated Bearings |
| Model | H-2317 X 2-15/16 |
| Brand | Consolidated Bearings |
| Model | H-318 X 3-1/4 |
| Brand | Electra/Grove Gear |
| Model | GR8420260.00 |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more