We never sell your data to third parties
Grove Gear GR-HMQ860-15-H1-250-55 GR8600600.55 15:1 ratio single-reduction worm gear speed reducer with 6.00" center distance, 250TC quill flange input, universal hollow output with 3.438" bore, and cast iron housing. Delivers 19.23 input HP at 1750 RPM, 17.61 output HP at 116 RPM, and 9515 lb-in output torque. One-piece CNC-machined IronMan housing with factory-filled PAG synthetic oil and Viton double-lip seals for heavy-duty right-angle power transmission.
MODEL GR8600600.55
Contact supplier for technical support on: 800-626-2120
$10,367.45 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
55
Center Distance
6 In.
Center distance (in)
6
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
15 HP to (< 20)HP
Input Bore (C Face)
1.625
Input Diameter (in)
1.625
Input Flange
254-6TC
Input HP
19.23
Input HP @ 1750 RPM
19.23
Input Keyway (C Face)
3/8 X 3/16
Input RPM
1750
Input Style
Quill
Max OHL (Output Shaft)
3723
Max Thrust Load (Output Shaft)
3990
Model Code
HMQ860
Motor Frame Size
250
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
3.438
Output Hollow Shaft Diameter (in)
3.438
Output HP
17.61
Output Key
7/8 X 4.00
Output RPM
116
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
9515
Output Torque (lb-in)
9515
Output Torque Range
5000 to 10000 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
3723
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
15 to 1
Ratio Range
15-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-HMQ-H1
Service Factor
1
Shaft Seal Material
Viton
Size
250TC
Thrust Rating - output shaft
3990
Regal Beloit Grove Gear&Reg; GR8600600.55
UPC: 690310035436 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 15:1 Gear Ratio, 19.23 hp Input, 17.61 hp Output, C-Face Quill Input, Hollow Bore Output, 1-5/8 in Dia Input, 3.438 in Dia Output, 116 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 9515 in-lb Output, 6 in Centre Distance, 3/8 x 3/16 in Input, 0.875 x 3.44 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 11-1/2 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 116 rpm
- Centre Distance: 6 in
- Input Type: C-Face Quill
- Output Size: 3.438 in Dia
- Input Size: 1-5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 9515 in-lb Output
- Horsepower: 19.23 hp Input, 17.61 hp Output
- Keyway Size: 3/8 x 3/16 in Input, 0.875 x 3.44 in Output
- Gear Ratio: 15:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Dimensions: 11-1/2 in W
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Weight: 331.0 lb
Warranty:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more
| Brand | Dixon Sanitary Fittings |
| Model | BV2IGN20033-A |
| Brand | Electra/Grove Gear |
| Model | GRL8210542.20 |
| Brand | Jason Industrial |
| Model | D560-8M-20 |
| Brand | SUMITOMO |
| Model | RNYM02-1220YC-AV-20 |
| Brand | GMN Bearings USA |
| Model | FE 432 M |
| Brand | NK North America Inc. |
| Model | K0759.002210X0700.005 |
| Brand | Dixon Sanitary Fittings |
| Model | B5102S100-A |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more