We never sell your data to third parties
Grove Gear Flexaline GRG-HMQ821-15-H1-56-23 GRG8210540.23 15:1 ratio, 2.06" center distance, right angle cast iron single-reduction worm gear speed reducer. Motorized quill input with 56C flange, universal hand hollow output with 1-7/16" bore. 0.625" input diameter, 1.438" output diameter.
MODEL GRG8210540.23
Contact supplier for technical support on: 800-626-2120
$1,316.56 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
23
Center Distance
2.1 In.
Center distance (in)
2.06
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input Flange
56C
Input HP
1.887
Input RPM
1750
Input Style
Quill
Keyway
3/16 X 3/32
Model Code
HMQ821
Motor Frame Size
56C
Motor HP Rating
1.5
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
1.438
Output Hollow Shaft Diameter (in)
1.438
Output HP
1.661
Output Key
3/8 x 3.00
Output RPM
116
Output Shaft Assembly Code
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
897
Output Torque Range
500 to 1000 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
1125
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
15 to 1
Ratio Range
15-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GRG
Series Style
GRG-HMQ-H1
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
56C
Thrust Rating - output shaft
1099
Regal Beloit Grove Gear&Reg; GRG8210540.23
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 15:1 Gear Ratio, 1.887 hp Input, 1.661 hp Output, 1.5 hp Motor, C-Face Quill Input, Hollow Bore Output, 5/8 in Dia Input, 1.438 in Dia Output, 116 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 897 in-lb Output, 2.06 in Centre Distance, 3/16 x 3/32 in Input, 3/8 x 3 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 6 in W
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 116 rpm
- Centre Distance: 2.06 in
- Input Type: C-Face Quill
- Output Size: 1.438 in Dia
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 897 in-lb Output
- Horsepower: 1.887 hp Input, 1.661 hp Output, 1.5 hp Motor
- Keyway Size: 3/16 x 3/32 in Input, 3/8 x 3 in Output
- Gear Ratio: 15:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Dimensions: 6 in W
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GRG
Packaging:
Limited
| Brand | Nord Gear |
| Model | SK1SM50-20-56C-RIGHT |
| Brand | Nord Gear |
| Model | SK172.1-90LP/4 CUS TW |
| Brand | Mako Products |
| Model | TSS-316-2000-109-20 |
| Brand | MRO Supply |
| Model | 6835-10-10-10-NWO-FG |