We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear Flexaline GRG-BM826-100-D-140 (catalog GRG8260108.00) is a 100:1 ratio right angle cast iron single-reduction worm gear speed reducer with 2.63" center distance. It features a 140TC motorized quill input with 0.75" input diameter and a double-extension solid output shaft with 1.250" diameter. This IronMan-based Flexaline series reducer offers interchangeable mounting with legacy Flexaline units.
MODEL GRG8260108.00
Contact supplier for technical support on: 800-626-2120
$1,490.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-D
Center Distance
2.6 In.
Center distance (in)
2.63
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
3/8-16 UNC
Housing material
Cast iron
HP Range
1/3 HP or Less (< 1/2)
Input Bore (C Face)
0.875
Input Diameter (in)
0.75
Input Flange
140TC
Input HP
0.386
Input HP @ 1750 RPM
0.386
Input Keyway (C Face)
3/16 x 3/32
Input RPM
1750
Input Style
3-Piece Coupled
Keyway
3/16 X 1.63
Max OHL (Output Shaft)
1625
Max Thrust Load (Output Shaft)
2091
Model Code
BM826
Motor Frame Size
140
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
1.250
Output HP
0.236
Output Key
1/4 x 1.75
Output RPM
17
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
851
Output Torque Range
500 to 1000 in lbs
Output type
Solid Shaft
Overhung Load
1625
Paint/Coating
Blue
Product Line
GRG Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
100 to 1
Ratio Range
100-1 to 250-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GRG Series - Ironman Worm Gear Reducers
Series Code
GRG
Series Style
GRG-BM-D
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
TAP Depth
0.69
Thrust Rating - output shaft
2091
Regal Beloit Grove Gear&Reg; GRG8260108.00
UPC: 690310041680 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 100:1 Gear Ratio, 0.386 hp Input, 0.236 hp Output, C-Face Coupled Input, Shaft Output, 7/8 in Dia Input, 1.25 in Dia x 2.73 in L Output, 17 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 851 in-lb Output, 2.63 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 17 rpm
- Centre Distance: 2.63 in
- Input Type: C-Face Coupled
- Output Size: 1.25 in Dia x 2.73 in L
- Input Size: 7/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 851 in-lb Output
- Horsepower: 0.386 hp Input, 0.236 hp Output
- Keyway Size: 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output
- Gear Ratio: 100:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GRG
Packaging:
- Weight: 57.0 lb
Warranty:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more
| Brand | Bunting Bearings |
| Model | EP040606 |
| Brand | Electra/Grove Gear |
| Model | EL8320072.00 |
| Brand | Koyo Bearing |
| Model | IR-151820 |
| Brand | Jason Industrial |
| Model | D2600-8M-135 |
| Brand | MRO Supply |
| Model | N5404-N-16X6.000-SS |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read more